Lloyd,
I recently built the 1.1.4 version of u-boot using the following steps.
1. To build for NAND you need to comment out the line:
#define CFG_ENV_IS_IN_FLASH 1
From the include/configs/davinci.h file.
2. host $ make davinci_config
3. host $ make
This created u-boot.bin and u-boot.srec files. I then used DVFlasher to
flash the u-boot.bin file to my NAND flash. I hope this helps.
Sincerely,
Chase Maupin
Software Applications
Catalog DSP Products
e-mail: [EMAIL PROTECTED]
phone: (281) 274-3285
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Lloyd Sargent
Sent: Thursday, September 13, 2007 8:28 AM
To: Kirill Sukhonosenko
Cc: [email protected]
Subject: Re: DaVinci Opensource Firmware Tools
I haven't had any luck building u-boot. My build craps out on me
(although one
of our contractors works).
Someone said that some versions of the compiler don't build it
correctly. Is
this true?
I'd like to test U-Boot myself to see how "slow" it really is...
Cheers,
Lloyd
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
