Hi, When I connect the USB drive to the board, it got detected but reports
errors. Does anyone know how I can get rid of those errors? Thanks! Lewis Here
is the screen captures: usb 1-1.1: USB disconnect, address 11usb 1-1.1: new
high speed USB device using musb_hdrc and address 12scsi8 : SCSI emulation for
USB Mass Storage deviceskobject_register failed for scsi_mod
(-17)kobject_register failed for usb_storage (-17) Vendor: USB 2.0 Model:
SD/MMC Reader Rev: Type: Direct-Access ANSI
SCSI revision: 00SCSI device sda: 3970048 512-byte hdwr sectors (2033 MB)sda:
assuming Write Enabledsda: assuming drive cache: write throughSCSI device sda:
3970048 512-byte hdwr sectors (2033 MB)sda: assuming Write Enabledsda: assuming
drive cache: write through sda: sda1Attached scsi removable disk sda at scsi8,
channel 0, id 0, lun 0kobject_register failed for scsi_mod
(-17)register_blkdev: cannot get major 8 for sdregister_blkdev: cannot get
major 65 for sdregister_blkdev: cannot get major 66 for sdregister_blkdev:
cannot get major 67 for sdregister_blkdev: cannot get major 68 for
sdregister_blkdev: cannot get major 69 for sdregister_blkdev: cannot get major
70 for sdregister_blkdev: cannot get major 71 for sdregister_blkdev: cannot get
major 128 for sdregister_blkdev: cannot get major 129 for sdregister_blkdev:
cannot get major 130 for sdregister_blkdev: cannot get major 131 for
sdregister_blkdev: cannot get major 132 for sdregister_blkdev: cannot get major
133 for sdregister_blkdev: cannot get major 134 for sdregister_blkdev: cannot
get major 135 for sd
_________________________________________________________________
Capture your memories in an online journal!
http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
