Hi Did you mean you´ve compiled the HID and USB HID apart of the kernel? i.e. you´ve downloaded or got from somewhere and loaded it into the DaVinci (even from the kernel source but uploaded after the kernel)? We´re using the 2.6.10 kernel, but I don´t believe that the version is the cause of the issue, it´s just a option while compiling the kernel or something else that make us unable to use anything of the USB connector.
Regards Gabriel On 10/2/07, Suyambu <[EMAIL PROTECTED]> wrote: > > Hi, > > As i have brief in the procedure in my previous mail, HID, USB HID modules > has to be compiled and loaded to get USB Keyboard information. All modules ( > usbcore.ko, musb_hdrc.ko, hid.ko, etc) has to be installed with 'insmod'. > > Any one has suggestion for my issue? I dont have any clue why im getting > "usb 1-1.3: reset low speed USB device using musb_hdrc and address 4" > error for USB mouse when both USB keyboard and USB mouse are connected? > > > Regards, > Suyambu. > > > > *Gabriel Teixeira <[EMAIL PROTECTED]>* wrote: > > Hi > > I was trying to install a USB keyboard in a DaVinci EVM but the > usbcore.kodoesn´t shows up when I use the modprobe to install it. Even a > locate > command doesn´t find it. How did you compile the kernel to provide this > module? > > Thanks in advance > Gabriel > > On 9/29/07, Suyambu <[EMAIL PROTECTED]> wrote: > > > > Hello All, > > > > I am trying to use USB Mouse and USB Keyboard simultaneously through > > external USB Hub on DVEVM board. I tried with v2.6.23-rc3-davinci1 and > > v2.6.21-omap1 versions of kernel and im unable to succeed working USB > > Mouse and USB keyboard simultaneously with any of these two kernels. > > > > The procedure i followed is: > > > > 1. Enabled all necessary modules as lodable modules - usbcore.ko, > > musb_hdrc.ko, hid.ko, usbhid.ko and loaded after booting the kernel in > > proper order. > > > > 2. Created Event Interface (evdev.ko) and loaded to capture the event. > > > > 3. I connect external USB HUB and plug in USB Mouse and USB Keyboard > > through USB HUB. Then I do, > > > > cat /dev/input/event2 - device file created for keyboard. > > > > Getting keyboard scan keys if i press the keys in USB keyboard. > > > > But if i do, > > cat /dev/input/event0 - device file created for USB Mouse. > > > > I get continuouly the followin message, > > > > "usb 1-1.3: reset low speed USB device using musb_hdrc and address 4" > > > > I traced the code and found that it is failing with EPIPE error > > (ENDPOINT stalled). > > > > > > 4. But, if i connect only one (USB Mouse or USB Keyboard), both are > > working fine. Getting scan keys for both USB mouse and USB Keyboard. Only > > when i connect both, i get error for mouse, but keyboard is ok. What could > > be the problem. Is there any issue in using both USB mouse and USB keyboard > > same time? What to be modified to make both work??? > > > > Thanks in advance for the suggestions. > > > > > > Regards, > > Suyambu. > > > > > > ------------------------------ > > Catch up on fall's hot new shows > > <http://us.rd.yahoo.com/tv/mail/tagline/falltv/evt=47093/*http://tv.yahoo.com/collections/3658+%0A>on > > Yahoo! TV. Watch previews, get listings, and more! > > > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > > > > ------------------------------ > Looking for a deal? Find great prices on flights and > hotels<http://us.rd.yahoo.com/evt=47094/*http://farechase.yahoo.com/;_ylc=X3oDMTFicDJoNDllBF9TAzk3NDA3NTg5BHBvcwMxMwRzZWMDZ3JvdXBzBHNsawNlbWFpbC1uY20->with > Yahoo! FareChase. > >
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
