Hi, Not sure if I've just been really stupid and missed something obvious but no matter what display configuration I choose in my bootargs I don't get any output on DC5 (some of the pins sit at differnt voltages but there is no change in any of the signals) but I always get an output on the DACs and S-Video. Have I missed something obvious or could there be a problem with the board? Thanks, Euan
-----Original Message----- From: Cochrane, Euan [mailto:[EMAIL PROTECTED] Sent: 13 November 2007 12:02 To: Davinci-Linux-Open-Source (E-mail) Subject: DVEVM analog RGB + SYNC? Hi, I am using the DACs on the DVEVM to output analog RGB but I need HSYNC and VSYNC signals for my display. DC5 (Video Output) has HSYNC and VSYNC pins but I have been unable to get any output from them while using the DACs as my video output, is the digital interface disabled when using the DACs? I have been told that to output RGB + SYNC I need to connect a THS8200 daughter card to DC5 and use the DVEVM digital output through the THS8200 DACs to get the full set of outputs. To me it just seems like a lot of bother just to get a simple sync signal, there must be a way to output these syncs without the need for extra hardware. Can anyone help me with this? Thanks, Euan _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
