Hi, I want to setup my DVEVM to output RGB888 so I need to setup the PINMUX
registers properly. Currently they are set as PINMUX0 = 0x81430C1F and PINMUX1
= 0x00000481. According to the VPBE guide (SPRUE37A) I need to set RGB888 and
clear PWM1, PWM2, LFLDEN and CFLDEN but the guide doesn't go as far as to say
which bits of the PINMUX registers control these and they are not defined in
the davincifb headers. Is there any other documentation that describes these
registers better? Can anyone tell me how to set and clear these registers? Also
I have VMOD.VDMD set to 2 which is described as RGB666 parallel will this mode
also output RGB888 if the PINMUX registers are set properly or is there another
value I should give VDMD that is not mentioned in the VPBE guide?
Thanks,
Euan
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
