Hi Robert,
The observation is that the kernel is not stopping but the UART
is not able to send the prints (because it stopped) it is mainly because
of an error in the tty settings of your bootargs as Niko has mentioned.
Regards,
JINU JOY THOMAS
Partner,
Ittiam Systems Pvt Ltd
(M) 9886112290
Message: 3
Date: Fri, 25 Jan 2008 09:19:00 +0100
From: "Robert W. Kuhn" <[EMAIL PROTECTED]>
Subject: Problem booting via NFS
To: [email protected]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Hello,
I try to boot my davinci-board via nfs (I followed the instructions from
c:\mvcyg4.0\opt\montavista\pro\documentation\docs\quickstart\cross-devel
opment\html\index.html)
But the kernel doies not boot:
TFTP from server 172.16.0.1; our IP address is 172.16.0.2
Filename 'uImage-ti-davinci_evm'.
Load address: 0x80700000
Loading:
#################################################################
#################################################################
#################################################################
#################################################################
#
done
Bytes transferred = 1334744 (145dd8 hex)
DaVinci EVM # bootm
## Booting image at 80700000 ...
Image Name: Linux-2.6.10_mvl401-davinci_evm
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1334680 Bytes = 1.3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing
Linu..............................................................
.......................... done, booting the
And now nothing happens. The evm stops.
What is the problem. The S3-switches are 1011 (from S0 to S3).
Thank you for your help!
Robert
------------------------------
Message: 4
Date: Fri, 25 Jan 2008 09:27:12 +0100
From: "Schoenemann, Nikolaus" <[EMAIL PROTECTED]>
Subject: RE: Problem booting via NFS
To: "Robert W. Kuhn" <[EMAIL PROTECTED]>,
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Robert,
The switches are ok. Could you please post the exact bootargs you're
using. When the boot sequence stops, it's mostly a typing error in the
bootargs.
Cheers,
Niko
******************
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
[EMAIL PROTECTED]
**********************************************************************
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
