Robert, After doing the setenv bootcmd that you are using do a saveenv to save the change you made to bootcmd.
Sincerely, Chase Maupin Software Applications Catalog DSP Products e-mail: [EMAIL PROTECTED] phone: (281) 274-3285 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert W. Kuhn Sent: Wednesday, February 06, 2008 7:31 AM To: [email protected] Subject: stupid problem with uBoot Hello, I try to boot from the internal hda. This is my env: DaVinci EVM # printenv bootdelay=3 bootfile="uImage" bootargs=mem=120 console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=172.16.0.2 video=dm64xxfb:output=pal bootcmd=setenv setboot setenv bootargs mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=172.16.0.2 video=dm64xxfb:output=pal stdin=serial stdout=serial stderr=serial ethaddr=00:0e:99:02:5c:3e videostd=pal setboot=setenv bootargs mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=172.16.0.2 video=dm64xxfb:output=pal But when I boot it stops at the uBoot-prompt. I guess there is an error in the bootcmd. When I enter setenv bootcmd setenv setboot setenv bootargs $(bootargs) video=dm64xxfb:output=$(videostd);run setboot;bootm 0x2050000 it works. Linux starts. But I did not had a change to save the enviroment via saveenv. So everytime I switch the evm on I have to set the setboot-env again. Waht can I do tho save the env in flash? Bye - Robert _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
