When a dma channel is opened, clear all pending events.
This was causing problems if UBOOT initialized the SDCard.
Remove SAM & DAM bits if source or destination
isn't a fifo.
Signed-off-by: Troy Kisky <[EMAIL PROTECTED]>
---
arch/arm/mach-davinci/dma.c | 37 ++++++++++++++++++++-----------------
1 files changed, 20 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index b6e2dfa..2ae95db 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -817,6 +817,7 @@ int davinci_request_dma(int dev_id, const char *dev_name,
map_dmach_queue(dev_id, eventq_no);
ret_val = 0;
+ davinci_stop_dma(dev_id); /* ensure no events are
pending */
} else
ret_val = -EINVAL;
}
@@ -1076,18 +1077,20 @@ void davinci_set_dma_src_params(int lch, unsigned long
src_port,
lch = temp_ch;
}
if (lch >= 0 && lch < DAVINCI_EDMA_NUM_PARAMENTRY) {
+ unsigned int i =
ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt;
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt = i;
+
/* set the source port address
in source register of param structure */
ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].src =
src_port;
- /* set the fifo addressing mode */
- if (mode) { /* reset SAM and FWID */
- ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt
- &= (~(SAM | EDMA_FWID));
- /* set SAM and program FWID */
- ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt
- |= (mode | ((width & 0x7) << 8));
- }
}
}
@@ -1110,19 +1113,19 @@ void davinci_set_dma_dest_params(int lch, unsigned long
dest_port,
lch = temp_ch;
}
if (lch >= 0 && lch < DAVINCI_EDMA_NUM_PARAMENTRY) {
+ unsigned int i =
ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt;
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt = i;
/* set the destination port address
in dest register of param structure */
ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].dst =
dest_port;
- /* set the fifo addressing mode */
- if (mode) { /* reset DAM and FWID */
-
- ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt
- &= (~(DAM | EDMA_FWID));
- /* set DAM and program FWID */
- ptr_edmacc_regs->paramentry[dma_chan[lch].param_no].opt
- |= ((mode << 1) | ((width & 0x7) << 8));
- }
}
}
--
1.5.4
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
