Hi Gopi,
I don't know exactly what this problem is. But please check your router /
DHCP server, the reason for this problem is "<7>eth0: no IPv6 routers present".
Also, why didn't you try to set static IP (as suggested by Phil Quiney)?
Regards,
Viet Hoang.
kaja gopi <[EMAIL PROTECTED]> wrote: Hi,
here is the minicom output while booting dm355evm board also printenv output.
any body tell me wts the problem exactly is..
it says bad block found on nand does it have to do any thing with booting..
printenv :
bootdelay=3
baudrate=115200
bootfile="uImage"
bootcmd=nboot 0x80700000 0 0x400000;bootm
rootpath=/home/confident/workdir/filesys
nfshost=192.168.100.1
bootargs=console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs
nfsroot=$(nfshost):$(rootpath),nolock mem=116M
stdin=serial
stdout=serial
stderr=serial
videostd=pal
Environment size: 318/16380 bytes
minicom output :
Welcome to minicom 2.2
OPTIONS: I18n
Compiled on Nov 26 2006, 02:42:19.
Port /dev/ttyS0
Press CTRL-A Z for help on special keys
.. this is MT29F16G08FAA device
UBL: detected valid U-Boot magic number
UBL: booting to U-Boot
U-Boot 1.2.0 (Oct 17 2007 - 15:38:02)
DRAM: 128 MB
NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V
8-bit)
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
nand_read_bbt: Bad block at 0x10120000
nand_read_bbt: Bad block at 0x1d4e0000
nand_read_bbt: Bad block at 0x1f120000
nand_read_bbt: Bad block at 0x3d240000
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V 8-bit)
Bad block table found at page 524160, version 0x01
Bad block table found at page 524096, version 0x01
nand_read_bbt: Bad block at 0x19ea0000
nand_read_bbt: Bad block at 0x1d020000
nand_read_bbt: Bad block at 0x27aa0000
nand_read_bbt: Bad block at 0x3ffe0000
2048 MiB
In: serial
Out: serial
Err: serial
ARM Clock :- 216MHz
DDR Clock :- 171MHz
Hit any key to stop autoboot: 0
Loading from NAND 1GiB 3,3V 8-bit, offset 0x400000
Image Name: Linux-2.6.10_mvl401
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1585240 Bytes = 1.5 MB
Load Address: 80008000
Entry Point: 80008000
## Booting image at 80700000 ...
Image Name: Linux-2.6.10_mvl401
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1585240 Bytes = 1.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Linux version 2.6.10_mvl401 ([EMAIL PROTECTED]) (gcc version 3.4.3 (MontaVista
3.4.3-25.0.104.0600975 2006-07-06)) #1 Wed Oct 17 15:44:12 7
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Machine: DaVinci DM355 EVM
Memory policy: ECC disabled, Data cache writeback
DM0350
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs
nfsroot=$(nfshost):$(rootpath),nolock mem=116M
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 116MB = 116MB total
Memory: 114176KB available (2762K code, 585K data, 164K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
Registering platform device 'serial8250.0'. Parent at platform
Registering platform device 'nand_davinci.0'. Parent at platform
Registering platform device 'dm9000.0'. Parent at platform
Registering platform device 'mmc.0'. Parent at platform
Registering platform device 'mmc.1'. Parent at platform
DaVinci I2C DEBUG: 15:42:09 Oct 17 2007
Registering platform device 'i2c'. Parent at platform
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
musb_hdrc: version 2.2a/db-0.4.8 [pio] [host] [debug=0]
Registering platform device 'musb_hdrc'. Parent at platform
musb_hdrc: USB Host mode controller at c7800000 using PIO, IRQ 12
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
arch/arm/mach-davinci/spi_platform_init.c:dm355_spi_board_init:123
dm355_spi_board_init
arch/arm/mach-davinci/spi_platform_init.c:dm355_spi_board_init:129 REG BOARD
ret 0
Registering platform device 'dm_spi.0'. Parent at platform
arch/arm/mach-davinci/spi_platform_init.c:dm355_spi_board_init:136 REGISTER
DEVICE ret 0
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
yaffs Oct 17 2007 15:41:45 Installing.
Initializing Cryptographic API
Registering platform device 'dm355fb.0'. Parent at platform
Console: switching to colour frame buffer device 90x30
watchdog: TI DaVinci Watchdog Timer: timer margin 64 sec
Registering platform device 'davinci_pwm0.0'. Parent at platform
Registering platform device 'davinci_pwm1.1'. Parent at platform
Registering platform device 'davinci_pwm2.2'. Parent at platform
Registering platform device 'davinci_pwm3.3'. Parent at platform
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Registering platform device 'serial8250'. Parent at platform
ttyS0 at MMIO 0x1c20000 (irq = 40) is a 16550A
ttyS1 at MMIO 0x1c20400 (irq = 41) is a 16550A
ttyS2 at MMIO 0x1e06000 (irq = 14) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize
loop: loaded (max 8 devices)
dm9000 Ethernet Driver
eth0: dm9000 at c7862000,c7864002 IRQ 45 MAC: 00:0e:99:02:c1:2f
i2c /dev entries driver
Linux video capture interface: v1.00
Registering platform device 'vpfe.1'. Parent at platform
vpfe vpfe.1: DaVinci v4l2 capture driver V1.0 loaded
ipipe major#: 253, minor# 0
Registering platform device 'dm355_ipipe.2'. Parent at platform
ipipe driver registered
af major#: 252, minor# 0
Registering platform device 'dm355_af.2'. Parent at platform
aew major#: 251, minor# 0
Registering platform device 'dm355_aew.2'. Parent at platform
elevator: using anticipatory as default io scheduler
at25xxA_spi_eeprom init
nand_davinci nand_davinci.0: Using 4-bit hardware ECC
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V 8-bit)
2 NAND chips detected
nand_bbt: ECC error while reading bad block table
nand_bbt: ECC error while reading bad block table
Creating 5 MTD partitions on "nand_davinci.0":
0x00000000-0x003c0000 : "bootloader"
0x003c0000-0x00400000 : "params"
0x00400000-0x00800000 : "kernel"
0x00800000-0x20800000 : "filesystem1"
0x20800000-0x80000000 : "filesystem2"
nand_davinci nand_davinci.0: hardware revision: 2.3
scan_boardinfo:<NULL>:-1067858964
modias <NULL> irq 2000000 max_speed 65535 bus_num 0 chip_select 0 mode
-1068867824
drivers/spi/spi.cat25xxA_spi_eeprom device register Succeeded
dm_spi.0: dm355 SPI Controller driver at 0xc7866000 (irq = 42)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
mmc mmc.0: Supporting 4-bit mode
mmc mmc.0: Using DMA mode
mmc mmc.1: Supporting 4-bit mode
mmc mmc.1: Using DMA mode
Registering platform device 'davinci-audio.0'. Parent at platform
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
..<7>eth0: no IPv6 routers present
... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
..<7>eth0: no IPv6 routers present
... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
..<7>eth0: no IPv6 routers present
... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
..<7>eth0: no IPv6 routers present
... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests .<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
..<7>eth0: no IPv6 routers present
... timed out!
thanks
regds
gopi k
---------------------------------
Save all your chat conversations. Find them online.
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
Send instant messages to your online friends http://uk.messenger.yahoo.com _______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
