Yes - that worked - thanks! Viet Hoang wrote: > Hi Steve, > Boot the board, login, then use this command: cat /dev/mtdblock5. > Put the scope at SCK(pin 6) , SI (pin 5) or SO (pin 2) (That EEPROM is > U65), you can see the signal. > Does this help? > Regards, > Viet Hoang. > > */Stephen Berry <[EMAIL PROTECTED]>/* wrote: > > > Does anyone have any experience in getting the SPI interface > running on the 355? > > It looks to me that the SPI framework as shipped with the 355 > doesn't work. To prove this I put a scope on the SPI eeprom on the > EVM board - and the part isn't used during boot. I have made an > assumption that the onboard eeprom was there for things like MAC > addresses and other important numbers... > > My driver does the same thing on my hardware - no hardware > response when I issue spi transactions (the software returns zeros). > > I do have Joshua Hintze's SPI code - but I would rather have my > driver fit into an existing, working framework (if it exists). > > Does anyone have any patches for the original MVL 2.6.10 SPI code > (1.3beta) - or anything else that may help? > > Thanks, > > Steve Berry > ID2 > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > Send instant messages to your online friends > http://uk.messenger.yahoo.com >
-- Integral Design and Development 312 Great Rd, Littleton MA 01460 voice: 978 501 7658 fax: 603-679-3988 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you have received this e-mail in error please notify the originator immediately. The addressee is formally notified hereby that this e-mail and any attachments are to be treated as confidential.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
