hi it would be nice to get those files on the list thanks Albert
On 3/25/08, lokowich <[EMAIL PROTECTED]> wrote: > > Thanks for the info. I reconfigured the remote.cfg to use the freshly > built server rather than the all.x64P, and successfully ran the > video2_copy app_remote example. > > Griffis, Brad wrote: > > Make sure none of your memory maps are overlapping: > > 1) Linux, declared in u-boot bootargs > > 2) CMEM, declared during insmod at run-time > > 3) DSPLINK, declared in your DSP server's tcf file provided that > you're using createFromServer() in your application config file. > > > > Brad > > > ------------------------------ > > *From:* [EMAIL PROTECTED] [ > mailto:[EMAIL PROTECTED]<[EMAIL PROTECTED]>] > *On Behalf Of *lokowich > *Sent:* Monday, March 24, 2008 2:47 PM > *To:* lokowich > *Cc:* davinci-linux-open-source > *Subject:* Re: dsplink incompatible or kernel oops > > > > OK- rolled back the DSP server to use the 1.40 dsplink, now the example > segfaults after the fourth cmem allocation. > > lokowich wrote: > > Mugdha, > The exact configuration helps, but I don't see how my CE 2.00 build is > pulling in the 1.50 version of dsplink. I'm using the cetools components, > so I expected a compatible DSP-side version. I'll poke around, but hints > are appreciated. > > Thanks, > Mark > > Kamoolkar, Mugdha wrote: > > Mark, > > > > As per the following wiki: > > http://wiki.davincidsp.com/index.php?title=Codec_Engine_Roadmap > > > > CE 2.00 does not work with DSPLink 1.50. It requires 1.40.05_p1. So just > > re-building DSPLink 1.50.00.04 (which is an engineering release btw, and > > you should move to 1.50 GA available on the external page) may not work > > correctly. So you would need to use 1.40.05_p1 on DSP-side also to make > > it work. If you use different versions on GPP & DSP-side, you will see > > the version mismatch error, as you did. > > > > CE 2.10 uses DSPLink 1.50 in case you particularly want to move to > > DSPLink 1.50. > > > > Regards, > > Mugdha > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] <[EMAIL PROTECTED]>] On > > Behalf Of lokowich > > Sent: Monday, March 24, 2008 10:13 PM > > To: davinci-linux-open-source > > Subject: dsplink incompatible or kernel oops > > > > I've built CE 2.00.01 and kernel modules from the cetools. The local > > version of video2_copy example works, but remote does not, stating > > Version mismatch between GPP and DSP-side > > GPP-side version [1.40.05_p1]: > > DSP-side version [1.50.00.04]: > > I've rebuilt the 1.50.00.04 version of dsplink, but now the app_remote > > causes a kernel oops after a failed assertion cBytes != 0 in mem.c. > > Note the two kernel modules are built against the DaVinci git kernel, so > > my support from MV and TI is nil. > > Any ideas out there? > > > > Mark Lokowich > > Advanced Communication Design > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > > > > > > > > > ------------------------------ > > > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > -- Albert Burbea Harishonim 8 Ramat Gan 52502, Israel Tel/Fax + 972-3-7526016 Mobile: +972-52-3541842
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
