On Tue, 2008-04-22 at 11:45 +0100, Jon Povey wrote: > My motivation here is trying to build an SD card that can bring up a > board that has a blank NAND in it, or recover from a corrupted NAND as I > will be working on firmware update code etc.
The wiki is now back up, and having read and thought about it a little more, it seems there are UBLs around that support booting from serial or NAND/NOR flash, but I don't see any for booting from SD. Can anyone on the list correct me? I'm not sure I can spend the time to write one. My best idea to bring up a blank / corrupt board would be to put a serial UBL on an SD card and have to connect a computer to serial to load the firmware. Or open it up and resolder some links so it boots off serial.. hmm. Ideas welcome. -- Jon Povey, Design Engineer Racelogic Limited Racelogic is a limited company registered in England. Registered number 2743719. Registered Office 5 Little Balmer, Buckingham Ind Pk, Buckingham MK18 1TF. The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
