Hi,all
We are trying the DVFlasher_1_10 with the custom designed
board with NAND Flash. The NAND flash chip we are using is K9F1G08, a big block
device with page size of 2k. The ram is 256M and CPU is dm6441.
When we try to flash the UBL via uart we get the following messages.
DVEVM: Initializing NAND flash...
DVEVM: Correct devID = A1 found
DVEVM: Writing UBL to NAND flash
DVEVM: Number of blocks needed for header and data: 0x00000001
DVEVM: Attempting to start in block number 0x00000001.
DVEVM: Unprotecting blocks 0x00000001 through 0x00000001.
DVEVM: Erasing blocks 0x00000001 through 0x00000001.
DVEVM: Writing header
DVEVM: eccvalue[0] 0X00000000
DVEVM: eccvalue[1] 0X00000000
DVEVM: eccvalue[2] 0X00000FFF
DVEVM: eccvalue[3] 0X00000FFF
DVEVM: Tempsparevalue 0X00000000
DVEVM: Tempsparevalue 0X00000000
DVEVM: Tempsparevalue 0X00000000
DVEVM: NAND ECC failure!
DVEVM: Starting UART Boot..
====================================================
Is there anyone use the same nand chip with me? does every one have
occured this problem?
Looking forward to your advice, thanks!
---------------------------------
雅虎邮箱，您的终生邮箱！_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
