please skip this mail, I have sent it to the wrong place. Thanks. On Wed, 2008-05-14 at 16:37 +0800, steven.zhang wrote: > COMMIT MSG: > ARM: Davinci: HD FrameBuffer 720p(1280*720) driver support > sign-off-by: > [EMAIL PROTECTED] > > This patch adds support for 720p HD framebuffer driver. > > To enable the 720p HD FB driver, pass the command line > video=davincifb:output=720p > to u-boot, and connect J15 to YCbCr input on TV, switch TV > mode as YCbCr, you should be able to see the framebuffer output(linux > tux). > > To enable the SD FB driver, pass the command line > video=davincifb:output=ntsc:format=composite to uboot, > and connect J14 to composite input on TV. > > The framebuffer driver now support for: > 720p HDTV > NTSC composite > PAL composite > > However, NTSC component and PAL component can also be supported, but the > osd2.0 HW does not connect it to Jxx output. > What we need to do next is to add support for: > 1080I HDTV > NTSC component > PAL component > > is it? > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
