hi Wu, Ruiyu i am also facing the same problem as you explained in http://linux.omap.com/pipermail/davinci-linux-open-source/2007-September/004 113.html
can you please tell me how to resolve this problem the bootlog is shown below ////////////////////////////////////////////// Booting PSP Boot Loader Starting NAND Copy Booting Application @ 0x81080000 U-Boot 1.1.3 (Mar 3 2006 - 01:18:40) U-Boot code: 81080000 -> 8109A3DC BSS: -> 810A3368 RAM Configuration: Bank #0: 80000000 256 MB unknown vendor=0 Flash: 0 kB NAND:64 MB In: serial Out: serial Err: serial ARM Clock :- 283MZ DDR Clock :- 189MZ Hit any key to stop autoboot: 0 Loading from device 0: <NULL> at 0x2000000 (offset 0x60000) Image Name: Linux-2.6.10_mvl401-davinci_evm Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1383992 Bytes = 1.3 MB Load Address: 80008000 Entry Point: 80008000 Automatic boot of image at addr 0x80200000 ... ## Booting image at 80200000 ... Image Name: Linux-2.6.10_mvl401-davinci_evm Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1383992 Bytes = 1.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... Bad Data CRC DaVinci EVM # /////////////////////////////////// Regards Rajesh G The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it. Contact your Administrator for further information. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
