all right. I am trying to compile the dsplink. Thanks. On Tue, 2008-06-10 at 11:17 +0530, Kamoolkar, Mugdha wrote: > Chris can probably correct me if I'm wrong, but I suspect that's because > dynamic memory configuration got added in DSPLink, which allowed Codec Engine > to release DSPLink binaries instead of forcing re-build. > > You will still need to rebuild DSPLink if you have a different kernel > version. The following wiki may be a good starting point for you to find out > how to do this ... > http://tiexpressdsp.com/wiki/index.php?title=Troubleshooting_DSPLink_build_issues > > Regards, > Mugdha > > -----Original Message----- > From: steven.zhang [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 10, 2008 10:51 AM > To: Kamoolkar, Mugdha > Cc: davinci; [EMAIL PROTECTED] > Subject: RE: Failed while insert dsplinkk on EVM 1.30 release > > Yeah, it seems that new version of EVM does not recompile DSPLINK when try to > compile whole EVM packages. Why not?Thanks. > On Tue, 2008-06-10 at 10:44 +0530, Kamoolkar, Mugdha wrote: > > I don't think the pre-built binaries in evm_1_30 support kernel 2.6.23. I > > think they just support MVL Pro 4 (i.e. 2.6.10 kernel). You will need to > > rebulid DSPLink on your kernel if you want to use it with 2.6.23. > > > > Regards, > > Mugdha > > > > -----Original Message----- > > From: steven.zhang [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, June 10, 2008 10:31 AM > > To: Kamoolkar, Mugdha > > Cc: davinci; [EMAIL PROTECTED] > > Subject: RE: Failed while insert dsplinkk on EVM 1.30 release > > > > Thanks for your reply. > > The kernel version in my board is 2.6.23. DSPLink built in evm_1_30 does > > not support for 2.6.23? I can not find any information of this in release > > note. > > On Tue, 2008-06-10 at 10:19 +0530, Kamoolkar, Mugdha wrote: > > > Looks like the kernel version with which DSPLink was built in the > > > evm_1_30 release does not match the version that you have on your target > > > board. Can you check the documentation to ensure that you have the > > > required matching kernel version? > > > > > > Regards, > > > Mugdha > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On > > > Behalf Of steven.zhang > > > Sent: Tuesday, June 10, 2008 10:01 AM > > > To: davinci > > > Cc: [EMAIL PROTECTED] > > > Subject: Failed while insert dsplinkk on EVM 1.30 release > > > > > > Hi, all. > > > After update evm_1_20 to evm_1_30, when I try to insmod dsplinkk.ko, it > > > will give the following error message: > > > > > > [EMAIL PROTECTED]:/opt/dvevm# insmod dsplinkk.ko > > > dsplinkk: no version for "struct_module" found: kernel tainted. > > > dsplinkk: no version for "struct_module" found: kernel tainted. > > > <3>dsplinkk: version magic '2.6.10_mvl401 preempt ARMv5 gcc-3.4' should > > > be '2.6.23-davinci1-g1220f74d-dirty mod_unload ARMv5 ' > > > dsplinkk: version magic '2.6.10_mvl401 preempt ARMv5 gcc-3.4' should be > > > '2.6.23-davinci1-g1220f74d-dirty mod_unload ARMv5 ' > > > insmod: error inserting 'dsplinkk.ko': -1 Invalid module format > > > > > > If try modprobe, error message is: > > > [EMAIL PROTECTED]:/opt/dvevm# modprobe dsplinkk.ko > > > FATAL: Module dsplinkk.ko not found. > > > > > > dsplinkk.ko is copied to /opt/dvevm/ and on version 1.20, work fine. > > > Does anyone encounter the same problem before? Thanks. > > > > > > _______________________________________________ > > > Davinci-linux-open-source mailing list > > > Davinci-linux-open-source@linux.davincidsp.com > > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-sour > > > ce > > >
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
