Hi, Can you check that TVP5147 driver is inserted in the kernel?
Brijesh Jadav -------------------------------------------------------------------------------------- Platform Support Products<http://dbdwss01.india.ti.com/pspproducts/default.aspx> Texas Instruments Inc Ph: +91-80-2504-8680 TI IP Ph: 504-8680 PSP Product Announcements<https://sps05.itg.ti.com/sites/sdo/psp/_layouts/listfeed.aspx?List=%7b56D44EE9-AE07-45BB-82BF-47B4CCC9AFEA%7d> ________________________________ From: Deepak Kumar GB [mailto:[EMAIL PROTECTED] Sent: Thursday, July 03, 2008 12:19 PM To: Jadav, Brijesh R Cc: [email protected] Subject: RE: Unable to initialize VPFE Hi Brijesh, Camera is connected to J13 Video Inport on DM6467 and Camera is in ON state I have also checked connected DVD player with Play state. In both the conditions VIDIOC_G_INPUT is failing. Is there anything else that I can check. Thanks, Deepak ________________________________ From: Jadav, Brijesh R [mailto:[EMAIL PROTECTED] Sent: Thursday, July 03, 2008 9:19 AM To: Deepak Kumar GB Cc: [email protected] Subject: RE: Unable to initialize VPFE Hi, Can you make sure camera is connected to the right port and it is on? Thanks, Brijesh Jadav -------------------------------------------------------------------------------------- Platform Support Products<http://dbdwss01.india.ti.com/pspproducts/default.aspx> Texas Instruments Inc Ph: +91-80-2504-8680 TI IP Ph: 504-8680 PSP Product Announcements<https://sps05.itg.ti.com/sites/sdo/psp/_layouts/listfeed.aspx?List=%7b56D44EE9-AE07-45BB-82BF-47B4CCC9AFEA%7d> ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deepak Kumar GB Sent: Wednesday, July 02, 2008 9:20 PM To: [email protected] Subject: Unable to initialize VPFE Hi, I am trying to run dvtb-r application on DM6467, with NTSC camera connected to composite input. I am getting error message, saying no inputs are connected and unable to initialize VPFE. Does anyone has any idea about this, Below is complete log. Thanks, Deepak [DVTB-LOG]: dvevmStEngine.c: Codec Engine Runtime initialized setp vpfe width 720 PASS: setp setp vpfe height 480 PASS: setp setp videnc1 numframes 30 FAIL: setp setp videnc1 codec h264enc PASS: setp setp engine name encode PASS: setp func videnc1 -t capture.264 [DVTB-LOG]: dvevmStFuncDispatcher.c: Starting Thread for command <videnc1> PNDG: func [DVTB-LOG]: dvevmStEngine.c: Engine <encode> opened. Handle 944d0 [DVTB-LOG]: dvevmStVidCapture1.c: Video Encoder <h264enc> initialized [DVTB-ERROR]: GET_INPUT failed.No inputs connected for Device /dev/video0 Error :: Invalid argument [DVTB-ERROR]: dvevmStVidCapture1.c: Unable to initialize VPFE device </dev/video0> [DVTB-LOG]: dvevmStVidCapture1.c: Video [capture][encode] completed for <-1> frames [DVTB-ERROR]: VIDIOC_STREAMOFF failed Error :: Permission denied [DVTB-LOG]: dvevmStVidCapture1.c: Video Encoder <h264enc> closed [DVTB-LOG]: dvevmStVidCapture1.c: Engine <encode> closed
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
