Hi, If you get desparate, you can always start the kernel with 'init=/bin/sh' that guarantees a shell prompt. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/>
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Schoenemann, Nikolaus Sent: 04 July 2008 07:02 To: gossips J; [email protected] Subject: RE: No access after login prompt on DVEVM Did you try username: root? You shouldn't need any password. Cheers, Niko ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of gossips J Sent: Friday, July 04, 2008 7:20 AM To: [email protected] Subject: No access after login prompt on DVEVM Hi, My target (TI DVEVM) is not coming up to linux shell. It just boots up with login prompt and it doesnt accept any username/pass too. I following following steps: 1. build a toolchain with 'buildroot' 2. comipled a TI davinci kernel with minimal configurations 3. setup a .ext2 filesystem 4. using TFTP I transferred both uImage and rootfs on the target 5. bootm 0x80700000 After above steps Linux starts booting up on target and it shows login prompt. In case I try to give username and pass it doesnt accept at all. I analyzed my rootfs' inittab but it seems OK. Please suggest what could be wrong here, Thanks in advance, Polk
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
