> From: Phil Quiney [mailto:[EMAIL PROTECTED] > Sent: 29 July 2008 10:15 > To: Maupin, Chase; Jon Povey; > [email protected] > Subject: RE: YAFFS2 with checkpointing on DM355 > > I get a little further than Jon, in that I can mount a blank > partition as yaffs2 and load a file system from a .tgz file > without error. When I umount I get a 'isCheckpointed=1' so > all seems OK. > > However, when I remount, the mount segments. I have tried > rebooting and the result is exactly the same. Any ideas what > to try next?
Good luck with that stuff. I may be learning more than I care to about MTD and NAND ECC soon as I need to try and work out how to update the kernel image and u-boot environment from linux (for firmware updates). For now I have an out-of-the-box EVM yaffs2 (2005 vintage) with 10M rootfs in a 64M partition, it mounts in 1.6s which will do for now. -- Jon Povey, Design Engineer [EMAIL PROTECTED] | +44(0)1280 825983 Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
