Hi Panchy,
I think the problem isn't the TFTP, but the bootlaoder.
I have had the same problem and to resolve it, I have used the spraai4
(wikipedia).
Regards
________________________________
Nicolas Cadio
ENSSAT, EII3
________________________________
----- Message d'origine ----
De : Panchy Rivas <[EMAIL PROTECTED]>
À : [email protected]
Envoyé le : Vendredi, 1 Août 2008, 17h00mn 19s
Objet : Problem booting DM6446 off TFTP
I am having problem booting off TFTP can anyone please help.
I built the kernel as in the s=getting started guide and put
it in the TFTP directory.
Does anyone have a working uImage for the DM6446 .. I would appreciate
it.
Here is what I get on the terminal window:
*************************************************************************************
*************************************************************************************
*************************************************************************************
TI UBL Version: 1.12, Flash type: NAND
Booting PSP Boot Loader
PSPBootMode = NAND
Starting NAND Copy...
Initializing NAND flash...
Valid MagicNum found.
NAND Boot success.
DONE
U-Boot 1.1.4 (Mar 21 2007 - 15:06:48)
U-Boot code: 81080000 -> 8109ABB0 BSS: ->
810A361C
RAM Configuration:
Bank #0: 80000000 256 MB
unknown vendor=0 Flash: 0 kB
NAND:64 MB
In: serial
Out: serial
Err: serial
ARM Clock :- 297MHz
DDR Clock :- 162MHz
MSP430 Firmware supports AM/PM Feature
Hit any key to stop autoboot: 0
Unknown command
'192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off' - tr
y 'help'
## Booting image at 80700000 ...
Image Name: Linux-2.6.10_mvl401
Image Type: ARM Linux Kernel Image
(uncompressed)
Data Size: 1579008 Bytes
= 1.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux.............................................................
............................................ done, booting
the
*************************************************************************************
*************************************************************************************
*************************************************************************************
Here is my printenv
DaVinci EVM # printenv
bootdelay=3
baudrate=115200
bootfile=uImage
nfshost=192.168.1.121
rootpath=/home/frivas/workdir/filesys
bootargs_hdd=console=ttyS0,115200n8 noinitrd
ip=192.168.1.41:192.168.1.40:192.16
8.1.1:255.255.255.0:::off root=/dev/hda1 mem=120M
serverip=192.168.1.40
nfspath=/home/frivas/workdir/filesys
ipaddr=192.168.1.41
gateway=192.168.1.1
netmask=255.255.255.0
dns1=192.168.1.2
dns2=192.168.1.3
static_ip=192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off
myip=192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off
bootargs_nfs=console=ttyS0,115200n8 noinitrd rw
ip=192.168.1.41:192.168.1.40:192
.168.1.1:255.255.255.0:::off root=/dev/nfs
nfsroot=192.168.1.40:/home/frivas/wor
kdir/filesys,nolock mem=120M
bootargs=console=ttyS0,115200n8 noinitrd rw
ip=192.168.1.41:192.168.1.40:192.168
.1.1:255.255.255.0:::off root=/dev/nfs
nfsroot=192.168.1.40:/home/frivas/workdir
/filesys,nolock mem=120M
bootcmd_tftp=192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off;bootm
bootcmd=192.168.1.41:192.168.1.40:192.168.1.1:255.255.255.0:::off;bootm
stdin=serial
stdout=serial
stderr=serial
ethaddr=00:0e:99:02:58:f9
videostd=ntsc
Environment size: 1124/16380 bytes
DaVinci EVM #
*************************************************************************************
*************************************************************************************
*************************************************************************************
Thanks
Panchy Rivas
_____________________________________________________________________________
Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
