Hello,
I wanted to test the Codec Engine 2.10.01 and did everything
as described in the documentation.
But when I'm trying to run the video_copy example application,
I get the following output:
App-> Application started.
DSP-side configuration mismatch/failure
0 -> success
Positive value -> DSP-side failure code.
(Uint32) -1 -> DSP-side component was not initialized.
DRV configuration status [0x0]
IPS configuration status [0x0]
POOL configuration status [0x0]
MPCS configuration status [0x0]
MPLIST configuration status [0x0]
MQT configuration status [0x0]
DATA configuration status [0xffffffff]
RINGIO configuration status [0x0]
@0x0008b87c:[T:0x00004002] OP - Processor_create_d> Loading and starting
DSP server 'video_copy.x64P' FAILED, status=[0x80008052] (look for error
code 'DSP_EBASE + 0x52' in dsplink*/packages/dsplink/gpp/inc/errbase.h)
@0x0008bad8:[T:0x00004002] OP - Processor_delete_d> Closing remote
transport FAILED, status=0x80008000.
@0x0008bb94:[T:0x00004002] OP - Processor_delete_d> Stopping DSP FAILED,
status=0x80008000
@0x0008eff2:[T:0x00004000] CE - rserverOpen: can't start
'video_copy.x64P'; Processor_create failed
CEapp-> ERROR: can't open engine video_copy
App-> Application FAILED.
What is causing the DATA configuration status not to be initialized?
Any hints?
Thanks,
Matthias
___________________________________________
Matthias Hardt
Software Developer
BerLinux Solutions GbR
Stefan Schwarzer & Guido Madaus
Hönower Str. 35 PF 17
10318 Berlin
Germany
E-Mail: [EMAIL PROTECTED]
Phone: +49 30/86437990
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
