Hi WK, I'm working at the same issue. I tried to activate the RGB888 modus for OSD0 on the DM355, but this is not working well. This modus seems to change the whole timing - the picture on the LCD is distorted. Have you solved your problem and is your RGB666 Panel working accurate by now? Thanks, Tino. --- Mit freundlichen Grüßen i.A. Tino Hoffstädt Hardwareentwicklung / Hardware Development Tel.: +49 (0)30 769929 - 0 Fax: +49 (0)30 769929 - 12 [EMAIL PROTECTED] GSP Sprachtechnologie Gesellschaft für elektronische Sprachsysteme mbH Teltowkanalstr. 1 D-12247 Berlin www.gsp-berlin.de <http://www.gsp-berlin.de/> Registergericht: Amtsgericht Berlin Charlottenburg, HRB-Nr.: 22455 Geschäftsführer: Dr. Helmut Loebner
-----Ursprüngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von ywkhong Gesendet: Donnerstag, 31. Juli 2008 06:30 An: [email protected] Betreff: RGB66 LCD signal Hi, I want to output from DM355 to my RGB666 LCD but it couldn't work properly where the FIELD pin suppose to be a R2 signal. I got a low voltage (about +-500mv) pulse train on this FIELD pin. I seems to me its still a PWM output pin. I'm wondering if this pin is outputing the correct signal by correctly set the registers to be RGB666 and do I need a pull up for this pin? Any help would be appreciate. Thanks. WK
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
