Chris,

There is a section in the LSP 1.20 release notes about this.

The section is - "Re-programming the MAC Address on your DM355 EVMs" in the 
PSP_##_##_##_###/lsp_psp_01_20_00_014_release_notes.html file.

You will need to use a temporary U-Boot binary - 
"u-boot-1.2.0-dm355_evm-macfix.bin" from PSP_##_##_##_###/bin/dm355 directory.

U-Boot upgrade instructions can also be found in the 
PSP_##_##_##_###/docs/commands.txt file.

This version of U-Boot sees the DM9000A mac address programmed in the reverse 
order and fixes it when you execute the dhcp command. Once corrected, you will 
need to use the actual U-Boot binary - "u-boot-1.2.0-dm355_evm.bin" from the 
same location.

Hope you have access to these components.

Thanks
Sneha

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Chris Thorp
> Sent: Tuesday, September 16, 2008 5:43 PM
> To: [email protected]
> Subject: DM9000A EEPROM programming
> 
> Does anyone have code for programming the SPI EEPROM on the DM9000A?
> I'm trying to bring up a new board, but can't get the Ethernet interface
> up in the copy of Das U-Boot that ships with the DVEVM355.  Trying the
> tftpboot or dhcp commands just timeout.  The link/speed lights don't
> illuminate at any point.  I'm guessing it's a mismatch between the
> DM9000A power on reset defaults and what the U-Boot is expecting.
> 
> Many thanks!
> 
> -Chris
> 
> --
> This message, including any attachments, contains confidential information
> intended for a specific individual and purpose, and is protected by law.
> If you are not the intended recipient, please contact the sender
> immediately and destroy all copies. You are hereby notified that any
> disclosure, copying, or distribution of this message, or the taking of any
> action based on it, is strictly prohibited.
> 
> 
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to