Please do not mind the log starting with characters (#, $,*,+) they are added by me( and please bear with me for that.) and I have enabled the debug switches. Here is an excerpt from the log "Starting of vpfe_mmap...initialize Ipipeinit<3>DavinciDisplay DavinciDisplay.1: Display Manager failed to allocate layer ializing displayDavinciDisplay DavinciDisplay.1: Unable to configure video layer for id = 0" Best Regards, Deepak Shankar V
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deepak Shankar-TLS,Chennai. Sent: Monday, September 22, 2008 8:04 PM To: Karicheri, Muralidharan; [email protected] Subject: RE: Help required on PAL/ipipe. Murali, The message I got is "Unable to configure video layer for id 0" "Display Manger failed to allocate layer for device 0" There seem to be some change between the PSP 1.30.00.40 and PSP 1.20.01.04. However I'm using only the former that came with the DVEVM. I would please send the actual log in the next mail after filtering out my debug messages. Cheers, Deepak Shankar V ________________________________ From: Karicheri, Muralidharan [mailto:[EMAIL PROTECTED] Sent: Monday, September 22, 2008 7:46 PM To: Deepak Shankar-TLS,Chennai.; [email protected] Subject: RE: Help required on PAL/ipipe. Deepak, I am unable to see this log message in the application source code. Could you search for this pattern to see where this is failing ? This should help me to isolate the problem. The driver code is located in drivers/media/video/davinci directory. Probably grep in this directory too. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Deepak Shankar-TLS,Chennai. Sent: Monday, September 22, 2008 9:57 AM To: [email protected] Subject: Help required on PAL/ipipe. Hello all, I am trying to use the examples .../../dvsdk_1_30_00_40/PSP_01_20_00_014/examples/dm355/ipipe with a PAL generator connected to the VIDEO_in of the DVEVM board. After trying to execute the resize example ./ipipe_rsz_example, I got an error "Unable to allocate memory for layer 0" Could some one please help me out to find what am I missing. Are there examples available in the PSP for frame grabbing/ part of frame grabbing? Cheers, Deepak DISCLAIMER: ------------------------------------------------------------------------ ----------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. ------------------------------------------------------------------------ -----------------------------------------------
Log
Description: Log
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
