Hi, The davinci boards should have /dev/fb/0 rather than /dev/fb0 - this is true for DM355 & DM6446. I do not have a DM6467 to check against but I would guess it is the same. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/>
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Naveena M. Sent: 29 September 2008 07:24 To: [email protected] Subject: OSD support in DM6467 Hi, We got encode and decode application with DM6467 EVM kit. But the composite video output is not working as we followed the instructions. In the application, we are opening /dev/fb0 (frame buffer) device. But /dev/fbx is not there in the root file system. First we used the uImage in the hard disk. Then we built a new kernel after ensuring framebuffer console, VDCE driver are enabled( by make menucofig). With this kernel also, we didn't get the frame buffer node. Can anybody tell what may be the issue? And also provide a solution ? or how to proceed? Regards, Naveena
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
