Hello Murali & Phil,
Thanks for your suggestions.
As mentioned by Murali the space was the issue.
I just checked I still those get warning messages but that has no effect on
working of those encodedecode demos.
regards,
-Ketan
----- Original Message ----
From: "Karicheri, Muralidharan" <[EMAIL PROTECTED]>
To: ketan deshpande <[EMAIL PROTECTED]>; Linux DaVinci
<[email protected]>
Sent: Tuesday, 30 September, 2008 9:39:07 PM
Subject: RE: EVMDM6446 and dvsdk_1_30_00_40
Hi,
Your problem is nothing to do with following
logs. It means you need to enable video port to
use AEW/AF drivers. For capture this is
not an issue.
Davici AEW Driver cannot be loaded
VIDEO PORT is not enabledData Flow path from
CCDC is disabled
Davinci AF driver cannot be loaded
VIDEO PORT is not enabled
CCDC needs to be configured<6>
Look at the cause of following errors
which shouldn’t happen:-
Encodedecode demo started.
Encodedecode Error: Failed FBIOPUT_VSCREENINFO on /dev/fb/3 (Invalid argument)
Encodedecode Error: Failed ioctl FBIOPUT_VSCREENINFO on /dev/fb/0
I think for vid1 kernel args, you have a space before 2500K.
video=davincifb:vid0=720x576x16,2500K:vid1=720x576x16,
2500K
^
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: [EMAIL PROTECTED]
________________________________
From:[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ketan deshpande
Sent: Tuesday, September 30, 2008
5:27 AM
To: Linux DaVinci
Subject: EVMDM6446 and
dvsdk_1_30_00_40
Hello Everybody,
I am following the sprue66d.pdf for using the DVEVM with DVSDK_1_30_00_40
But it fails saying
*******************************************************************************
Encodedecode demo started.
Encodedecode Error: Failed FBIOPUT_VSCREENINFO on /dev/fb/3 (Invalid argument)
Encodedecode Error: Failed ioctl FBIOPUT_VSCREENINFO on /dev/fb/0
Capturing 720x480 video (cropped to 720x480)
Total I-frames: 0, P-frames: 0, B-frames: 0, IDR-frames: 0 rejected: 0
*******************************************************************************
on further investigation we found that kernel itself was having some issues
opening the video port.
following is the part of dmesg;
*******************************************************************************
Registering platform device 'davincifb.0'. Parent at platform
davincifb davincifb.0: dm_osd0_fb: [EMAIL PROTECTED],0 with framebuffer size
675KB
davincifb davincifb.0: dm_vid0_fb: Initial window configuration is invalid.
davincifb davincifb.0: dm_vid0_fb: [EMAIL PROTECTED],0 with framebuffer size
2500KB
davincifb davincifb.0: dm_osd1_fb: [EMAIL PROTECTED],0 with framebuffer size
675KB
davincifb davincifb.0: dm_vid1_fb: Initial window configuration is invalid.
davincifb davincifb.0: dm_vid1_fb: [EMAIL PROTECTED],0 with framebuffer size
1020KB
watchdog: TI DaVinci Watchdog Timer: timer margin 64 sec
Registering platform device 'davinci_resizer.2'. Parent at platform
Registering platform device 'davinci_previewer.2'. Parent at platform
Linux video capture interface: v1.00
Registering platform device 'vpfe.1'. Parent at platform
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: NACK detected
DaVinci I2C WARNING: i2c: NACK detected
vpfe vpfe.1: DaVinci v4l2 capture driver V1.0 loaded
Registering platform device 'DavinciDisplay.1'. Parent at platform
Trying to register davinci display video device.
layer=c73dfc00,layer->video_dev=c73dfd64
Trying to register davinci display video device.
layer=c73dfa00,layer->video_dev=c73dfb64
davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
Davici AEW Driver cannot be loaded
VIDEO PORT is not enabledData Flow path from
CCDC is disabled
Davinci AF driver cannot be loaded
VIDEO PORT is not enabled
CCDC needs to be configured<6>Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
*******************************************************************************
following is my bootarg
Kernel command line: console=ttyS0,115200n8 noinitrd rw root=/dev/nfs
nfsroot=142.102.22.174:/home/ketan/workdir/filesys,nolock mem=116M
ip=142.102.22.85:142.102.22.174:142.102.22.39:255.255.254.0:dm6446evm::off
dm9000eth=mac:00.0e.99.02.5b.71
video=davincifb:vid0=720x576x16,2500K:vid1=720x576x16,
2500K:osd0=720x576x16,2025K
davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=ntsc
Has anybody else observed the same issue? Any idea how to resolve that?
regards,
-Ketan
________________________________
Be the first one to try the new Messenger 9 Beta! Click
here.
Add more friends to your messenger and enjoy! Go to
http://messenger.yahoo.com/invite/_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
