Does this issue occur ONLY on your custom board, i.e. can you successfully connect to the EVM using the same configuration?
________________________________ From: Marta Gros Marín [mailto:[EMAIL PROTECTED] Sent: Sunday, November 02, 2008 9:56 PM To: Griffis, Brad Subject: RE: Icecrusher Hi Brad, Thank you for your answer. I'm using CSS 3.3 SR2 and Blackhawk Driver Release v3.3.200.2,( 05 SEP 2008 ) I attached some plots about CCS setup, so I don't miss anything. There I try changing the JTAG TCLK frequency but it didn't work. Do you know what could be the problem with my custom board? Thanks in advance. Best regards, Marta ________________________________ De: "Griffis, Brad" <[EMAIL PROTECTED]> Enviado: viernes, 31 de octubre de 2008 16:46 Para: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>, "Davinci-linux-open-source" <[email protected]> Asunto: RE: Icecrusher Which version of CCS are you using (e.g. CCS 3.3 SR11). What version of the Blackhawk emulation drivers do you have? How did you configure cc_setup? Brad ________________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marta Gros Marín Sent: Friday, October 31, 2008 6:51 AM To: Davinci-linux-open-source Subject: Icecrusher Hi to all, I have a problem with my custom board (with DM355), I'm trying to connect it using BlackHawk JTAG USB510L but I always get this error: Error connecting to the target: Error 0x80000240/-1029 Fatal Error during: Initialization, OCS, The ICECrusher register scan returned invalid data Sequence ID: 0 Error Code: -1029 Error Class: 0x80000240 Could anyone please give me some advise on how to find out what's going on and how to solve the problem? Thanks in advance. Best regards, Marta
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
