Hello, I'm trying to bring out BT.656 output from the dm355 and am facing some problems - In section 2.2.2.1 of the vpbe datasheet, its mentioned as - "To use BT656 mode, the VENC must operate in the standard mode (VIDCTL.VDMD=0). Note that this mode operates correctly only when the pixel clock frequency is half of the VENC clock. In this mode, the sync signals are embedded within the data stream and HSYNC/VSYNC are inactive." I'm not able to fully comprehend the meaning of this statement - Since BT.656 is operating at 27M bytes/seconds(27 MHz), should I have to configure the VPBE encoder clock such that its 54 MHz or more? Also the analog and the digital outputs should be available simultaneously - I tried to connect the analog output to a TV and all I'm able to see is some very feeble lines moving vertically over the display. Could someone please help me in this regard. in case if the VPBE clock has to be programmed, through the PLLDIV3 or so, could you please tell me which portion of code should be touched for this. I thank a lot in advance for any help. Cheers, Deepak
DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. ----------------------------------------------------------------------------------------------------------------------- _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
