Hi All, Thanks a lot for your suggestions. i tried setting the staic ip address as below in 'bootargs'
ip=$<clientip>:$<serverip>:$<gatewayip>:$<netmask>::off But still i cannot bootup. One more doubt that i have is: When we connect this device to a PC, the "Local Area Connection" should show status as "Connected". Right? But i find it "Disconnected"... i am beginning to wonder if this is hardware issue with this EVM board? How can i make sure of this? Please advise. Regards, Pradeep. On Fri, Nov 21, 2008 at 12:53 PM, Deepak Shankar-TLS,Chennai. < [EMAIL PROTECTED]> wrote: > > Try adding the gateway ip too to your bootargs 'ip' parameter. > See this- > http://www.mail-archive.com/[EMAIL PROTECTED] > om/msg07462.html<http://www.mail-archive.com/[email protected]/msg07462.html> > Ip has to be given as > ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoco > nf> > > You can see whether the requests are coming to your host in > /var/log/messages - > > Hope this helps. > > Cheers, > Deepak > > > ________________________________ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Pradeep L > Sent: Friday, November 21, 2008 9:21 AM > To: Rajashekhara, Sudhakar > Cc: [email protected] > Subject: Re: DM6467 EVM bootup problem > > > > Hi, > > > > I set static ip address and removed ip=dhcp from bootargs. Below is the > list of environment values that i have set here. > > bootdelay=3 > > baudrate=115200 > > setenv=bootcmd nboot 80700000 0 a0000 > > bootfile=/tftpboot/uImage > > rootpsth=/home/pradeep_6467/workdir/filesys > > autoload=yes > > ip=192.168.1.50 <http://192.168.1.50/> > > serverip=192.168.1.111 <http://192.168.1.111/> > > bootcmd=nboot 80700000 0 a0000 > > stdin=serial > > stdout=serial > > stderr=serial > > ethaddr=00:0e:99:02:b3:47 > > ipaddr=192.168.1.2 <http://192.168.1.2/> > > serverip=192.168.1.100 <http://192.168.1.100/> > > netmask=255.255.255.0 <http://255.255.255.0/> > > rootpath=/home/pradeep_6467/workdir/filesys > > bootargs=console=ttyS0,115200n8 noinitrd rw > ip=192.168.1.2:(serverip):255.255.255.0::off root=/dev/nfs > nfsroot=192.168.1.100:/home/<user account>/workdir/filesys, > > nolock mem=120M > > nfshost=192.168.1.100 <http://192.168.1.100/> > > Environment size: 593/131068 bytes > > And then I tried to boot the device. I got the following messages: > > Loading from NAND 128MiB 3,3V 8-bit, offset 0xa0000 > > Image Name: Linux-2.6.10_mvl401-davinci_evm > > Image Type: ARM Linux Kernel Image (uncompressed) > > Data Size: 1390892 Bytes = 1.3 MB > > Load Address: 80008000 > > Entry Point: 80008000 > > Is this what I am to expect? > > Thanks and regards, > > Pradeep. > > > On Thu, Nov 20, 2008 at 6:28 PM, Rajashekhara, Sudhakar > <[EMAIL PROTECTED]> wrote: > > > Pradeep, > > This can happen if you are using ip=dhcp in your bootargs but > there is no DHCP server. If you are using static IP address, remove > ip=dhcp from your bootargs. You can also disable DHCP support from > menuconfig under Networking Options if you are using static IP address. > > Regards, Sudhakar > ________________________________ > > From: [EMAIL PROTECTED] > [EMAIL PROTECTED] On Behalf Of > Pradeep L [EMAIL PROTECTED] > Sent: Thursday, November 20, 2008 8:25 AM > To: [email protected] > Subject: DM6467 EVM bootup problem > > > Hi All, > > I am working on DM6467 EVM. The problem is when i bootup the > board I get the following message "Sending DHCP requests...timed out! > IP-config: Retrying forever (NFS root)....". I suspect it is > something to do with the u-boot configuration? (I am not sure though). > Can anyone please help me out on this? > > Thanks in advance, > Pradeep, > > > > > DISCLAIMER: > > ----------------------------------------------------------------------------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > It shall not attach any liability on the originator or HCL or its > affiliates. Any views or opinions presented in > this email are solely those of the author and may not necessarily reflect > the opinions of HCL or its affiliates. > Any form of reproduction, dissemination, copying, disclosure, modification, > distribution and / or publication of > this message without the prior written consent of the author of this e-mail > is strictly prohibited. If you have > received this email in error please delete it and notify the sender > immediately. Before opening any mail and > attachments please check them for viruses and defect. > > > ----------------------------------------------------------------------------------------------------------------------- > >
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
