[EMAIL PROTECTED] writes: > Signed-off-by: Chaithrika U S <[EMAIL PROTECTED]> > > This is the updated set of patches to add PHY layer support to EMAC driver. > Comments have been incorporated. > DM644x and DM646x are affected by these patches. > > The following is a list of the patches > Patch 1: DM644x defconfig file changes to include PHY support > Patch 2: Introduces the ET1011C PHY driver to be used by DM646x EVM > Patch 3: DM646x defconfig file changes to include PHY support > Patch 4: Modifies the common Davinci defconfig file to include PHY > Patch 5: Changes the EMAC driver to include MII bus and PHY device > Patch 6: Registers and defines PHY fixup for LXT971 on DM644x EVM > Patch 7: Removes the davinci_emac_phy.c and davinci_emac_phy.h files > > Testing done: > 1. Tested for both DM6446 and DM6467 EVMs > 2. Tested with NFS boot, flood ping tests > 3. Basic testing done for Gigabit mode too
Chaithrika, Thanks for this series. I've applied it after dropping the 'PHY driver' patch in favor of the one that was merged into linux-net. Kevin _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
