I use one of these and am happy with it. http://www.ronetix.at/peedi.html I am working with Ronetix at the moment to fix their firmware support for writing YAFFS2 images directly to NAND, but they are very helpful and responsive to fix firmware problems.
-- Jon Povey, Design Engineer [email protected] | +44(0)1280 825983 ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of zuowenping Sent: 16 January 2009 08:32 To: davinci-linux-open-source Subject: Can we burn uImage or rootfs by jtag in Arm platform? Dear: Now, I am developing in DM355 platform ,We use nand_programmer in CCS3.3 ide tools and we can burn ubl and uboot to nand-flash,and it translates datas to target by jtag first.but if my target don't support net,we can't translate data by tftp and we have to translate datas (just such as uImage and ramdisk) by UART,As we know, It is so slowly!! It is terriable for we having many device to be burned,so Can we burn uImage or rootfs by jtag using the nand_programmer ?and what we should do for it? 2009-01-16 ________________________________ zuowenping Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
