Brian,
Could you provide more details to the failure ?
Regards
swami
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf
> Of Brian Rhodes
> Sent: Thursday, January 22, 2009 11:46 PM
> To: [email protected]
> Subject: DM6446 MUSB
>
> Hello,
>
> Is PIO ONLY the only working USB mode in the current GIT kernel? By
> working, I mean without periodic reset. PIO is suitable for my
> application, but I just merged the latest GIT code into our kernel tree
> and without CONFIG_MUSB_PIO_ONLY=y USB does not work very well, so I was
> curious if I had possibly overlooked something. Does the CPPI DMA mode
> work well on DM6446 in the current GIT code?
>
> musb_hdrc: version 6.0, pio, host, debug=0
> musb_hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn)
> musb_hdrc: MHDRC RTL version 1.300
> musb_hdrc: setup fifo_mode 2
> musb_hdrc: 7/9 max ep, 2624/4096 memory
> musb_hdrc: hw_ep 0shared, max 64
> musb_hdrc: hw_ep 1tx, max 512
> musb_hdrc: hw_ep 1rx, max 512
> musb_hdrc: hw_ep 2tx, max 512
> musb_hdrc: hw_ep 2rx, max 512
> musb_hdrc: hw_ep 3shared, max 256
> musb_hdrc: hw_ep 4shared, max 256
> musb_hdrc: USB Host mode controller at c8000000 using PIO, IRQ 12
> musb_hdrc musb_hdrc: MUSB HDRC host driver
> musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
>
> Thanks.
>
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
