Do you have MMC drivers compiled into your kernel? If they are loadable modules, you will have to make them statically compiled or if you can't (like the SDIO patches) you will need to use an initrd. For more help, please attach the console messages you get while booting so we can see what drivers are loading, etc.
-- Jon Povey, Design Engineer [email protected] | +44(0)1280 825983 Racelogic is a limited company registered in England. Registered number 2743719 . Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, Bucks, MK18 1TB . The information contained in this electronic mail transmission is intended by Racelogic Ltd for the use of the named individual or entity to which it is directed and may contain information that is confidential or privileged. If you have received this electronic mail transmission in error, please delete it from your system without copying or forwarding it, and notify the sender of the error by reply email so that the sender's address records can be corrected. The views expressed by the sender of this communication do not necessarily represent those of Racelogic Ltd. Please note that Racelogic reserves the right to monitor e-mail communications passing through its network ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of zuowenping Sent: 18 February 2009 08:35 To: Paulraj, Sandeep; GarryJackson; davinci-linux-open-sou...@linux. Subject: Re: RE: DM355 u-boot and SD filesys start I have set just like : setenv bootargs 'mem=116M console=ttyS0,115200n8 root=/dev/mmcblk0p1 rw rootfstype=vfat ip=off video=davincifb:vid0=720x576x16,2500K:vid1=720x576x16,2500K:osd0=720x576 x16,2025K davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=pal' but i cann't boot,anyone can help me?
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
