Hi Guys,
I have an issue when I plug in a Dell keyboard into the
DM355 EVM and I am using the TI lsp distribution, the key board is
recognized in the driver however it does not get listed in the
/dev/input directory, below are some outputs that might help.
# ls /dev/input
mice
#
# cat /proc/bus/input/devices
I: Bus=0003 Vendor=413c Product=2005 Version=0105
N: Name="DELL DELL USB Keyboard"
P: Phys=usb-musb_hdrc-1/input0
H: Handlers=kbd
B: EV=12000b
B: KEY=10000 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: ABS=100 0
B: LED=1f07
#
# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04d6 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=413c ProdID=2005 Rev= 1.05
S: Manufacturer=DELL
S: Product=DELL USB Keyboard
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
#
I would be very grateful for any input on this.
Kind regards
James
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
