Hi, I tried to use version u-boot version 1.3.4 for DM6467. The only modification I did was in davinici_dveevm_config file to use for NAND flash with Large pages. I flashed this with sfh_Dm646x.exe utility. The board is unable to boot and keeps showing UBL code. Has this been tested on DM6467 for booting from NAND flash. Thanks, Neeraj
--- On Mon, 4/6/09, Neeraj Tandon <[email protected]> wrote: > From: Neeraj Tandon <[email protected]> > Subject: Re: DM6467 EVM u-boot Nand flash issue > To: "SandeepPaulraj" <[email protected]>, > [email protected], "Sidharth Garde" > <[email protected]> > Date: Monday, April 6, 2009, 10:26 AM > Hi, > > You should go to denx site which hosts u-boot. It has links > for all previously released u-boot version. > > My understanding is TI supported u-boot version is only > 1.2 > > Regards, > Neeraj > > > - > > --- On Mon, 4/6/09, Sidharth Garde <[email protected]> > wrote: > > > From: Sidharth Garde <[email protected]> > > Subject: Re: DM6467 EVM u-boot Nand flash issue > > To: "Paulraj, Sandeep" <[email protected]>, > "Neeraj Tandon" <[email protected]>, > [email protected] > > Date: Monday, April 6, 2009, 12:02 AM > > Dear All, > > > > I am also working on a DM6467 proceesor. Can you > please > > tell me where I can find U-Boot 1.3.4 and u-boot > version > > 2009.3 for downloading? > > > > Thanks, > > > > Sidharth > > > > ----- Original Message ----- From: "Paulraj, Sandeep" > > <[email protected]> > > To: "Neeraj Tandon" <[email protected]>; > > <[email protected]> > > Sent: Sunday, April 05, 2009 5:50 AM > > Subject: RE: DM6467 EVM u-boot Nand flash issue > > > > > > Neeraj, > > The latest > > U_boot does not have support for DM6467. > > You are compiling for the DVEVM. This is meant for > DM6446. > > Compiling for DM6446 and using it for DM6467 EVM will > not > > work. > > > > Withing TI we have got U-Boot working on 1.3.4. Maybe > you > > can use that. > > > > I will add support for DM6467 in U-Boot GIT later > > this month > > > > Thanks, > > Sandeep > > ________________________________________ > > From: [email protected] > > [[email protected]] > > On Behalf Of Neeraj Tandon [[email protected]] > > Sent: Saturday, April 04, 2009 1:38 PM > > To: [email protected] > > Subject: DM6467 EVM u-boot Nand flash issue > > > > Hi, > > > > I posted in this in u-boot list. Since this is more > > specific to Davinci I am posting here. If anyone has > used > > recent version of u-boot for DM6467 and managed to > boot from > > NAND flash then let me know. Following is the issue I > am > > facing with U-boot. > > > > I am using u-boot version 2009.3 for TI Davinci DM6467 > EVM. > > The reason to use this was support of usb related > commands > > for DM6467 in this tree. > > > > I built the u-boot.bin for NAND flash. My only > modification > > was in file > > include/configs/davinci_devevm.h where I #define > > CONFIG_SYS_USE_NAND > > > > I built this and flashed this using TI provide > > sfh_DM6467.exe. The flashng goes well and I see blocks > 6 and > > 7 being written. However on power on of EVM I see > > following: > > > > Chip initialization passed! > > TI UBL Version: 1.30 > > Booting Catalog Boot Loader > > BootMode = NAND > > Starting NAND Copy... > > Valid MagicNum found. > > DONE > > Jumping to entry point at 0x81080000 > > > > This keeps repeating and EVM it is unable to boot. > > > > Any one used this version of u-boot with a NAND flash > and > > TI DVEVM. Any suggestion on changes I should make to > isolate > > this error ? > > > > Regards, > > Neeraj > > > > > > > > > > > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > > > > > > > > >
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
