Hi, We have ported the frame buffer driver to DM355 and you can get it from http://arago-project.org/git/people/sneha/linux-davinci-staging.git
Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 Phone : 301-515-3736 email: [email protected] >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf >Of David Brownell >Sent: Wednesday, June 03, 2009 6:09 PM >To: [email protected] >Subject: Re: about framebuffer driver on DM355 EVM. > >On Wednesday 03 June 2009, Kevin Hilman wrote: >> While the davincifb driver is registered by the kernel, the DM355 >> board code does not register a corresponding device, so the probe >> method is never called. >> >> Looking through the board code, the only board code that registers a >> davincifb device is the dm644x-evm. > >Yeah, I noticed that too. > >Didn't quite feel compelled to resolve it ... but with all the >activity on V4L2 and on mainstreaming DaVinci code, I'd sure hope >that someday *soon* we'll have video output (and input) going on >dm355 evm hardware. > >I'd hope that for dm355, the only issue with "davincifb" is how >to enable and then configure it. > >- Dave > >_______________________________________________ >Davinci-linux-open-source mailing list >[email protected] >http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
