Hi, As of I know, the default configuration that comes from TI DVSDK 1.30 will have MMC SD card enabled. It can be used without any change to be done. If you are able see the following message, when the DM6446 EVM board is booting, then mmc sd card is already supported by the MVL 2.6.10 kernel.
. . . Registering platform device 'mmc.0'. Parent at platform . . . mmc mmc.0: Supporting 4-bit mode mmc mmc.0: Using DMA mode . . . By default, mmc sd card can be accessed by mounting the device /dev/mmcblk0 With best regards, Venkatachala Upadhya| Extn: 65395| -- -----Original Message----- From: davinci-linux-open-source-bounces+venkatachala_upadhya=mindtree....@linux.davincidsp.com [mailto:davinci-linux-open-source-bounces+venkatachala_upadhya=mindtree....@linux.davincidsp.com] On Behalf Of Alana Sent: 22 June, 2009 5:28 PM To: [email protected] Subject: mmc sd driver issue Hi, i work with dm6446 on Linux 2.6.10 MV Kernel. Now i test the sd driver, but i have some trouble. when i insert sd card , the kernel print "devfs_mk_dir: invalid argument." i know the message is from "devfs_mk_dir("mmc")", why, if devfs_mk_dir("mmc") is not right? have anyone faced the problem ? thanks alana http://www.mindtree.com/email/disclaimer.html _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
