zuowenping,
You need to modify the arch/arm/mach-davinci/davinci_spi_platform.c
struct spi_board_info dm6467_spi_board_info[], .modalias =
DAVINCI_SPI_EEPROM_NAME, to .modalias = "spidev". Also you must enable
CONFIG_SPI_SPIDEV. After that the kernel will detect the device as
"spidev0" and that should get spidev_probe() to work. I think :)
Regards,
Philby
On Tue, 2009-06-23 at 10:00 +0800, zuowenping wrote:
> I have read the source code ,davinci_spi_board_init() must support
> board info for the spidev driver ,just like the spi_eeprom example,but
> i don't know how can i support the board info? i have insmod the
> module spidev.ko,but i cann't prouduce the device
> inode /dev/spi*.* ,so it must the spidev_probe() function cann't been
> callback!
>
>
> 2009-06-23
>
> ______________________________________________________________________
> zuowenping
>
> ______________________________________________________________________
> 发件人： zuowenping
> 发送时间： 2009-06-22 16:34:45
> 收件人： davinci-linux-open-source
> 抄送： chris-meng
> 主题： how can i use spi in dm355?
>
> dear all:
> I am using mv_pro_4.0.1 in dm355 platform,now i want to use
> spi0 and spi1 to communication with other devices which is like using
> i2c open() , read() ,and write() to various device by sub address in
> userspace. My linux kernel is 2.6.10,I have find the spidev.c and
> spidev_test.c in linux2.6.30,So i have transplanted the spidev.c as a
> module in linux kernel 2.6.10,but when i insmod the module,i cann't
> find the needful device in /dev/ path,so i cann't run spidev_test.c to
> test spi,I think there may be some errors in dm355 device driver,but i
> don't know how to modify it? Any help will be appreciated!
>
> 2009-06-22
>
> ______________________________________________________________________
> zuowenping
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
