Hi the main problem was that the there was enabled pipe to H3A. So Previewer did not get interupts, or only few. (Errata of DM6446) Now it is realy funny, that when I run my application telnet do not respond. As well saving image to NFS is really slow. In LSP130 it work quite well. I have no idea why it is so:) Have not tried to examine this. May be I should exculde something from kernel. Some networking features. Ondrej Pindroch SoftHard Technology ltd.
-----Original Message----- From: "Jadav, Brijesh R" <[email protected]> To: Ondrej Pindroch <[email protected]>, davinci-linux-open-source <[email protected]> Date: Tue, 7 Jul 2009 19:04:24 +0530 Subject: RE: LSP 2.10 Previewer hung on preview task Hi, You can check by doing telnet to the board and check the previewer interrupts if Linux kernel is not hung. Are you able to come out of the application by pressing Ctrl+c? If it is not coming out, something is getting corrupted. You may want to dump Previewer registers and check whether they are corrupted or not. Thanks, Brijesh Jadav From:[email protected] [mailto:[email protected]] On Behalf OfOndrej Pindroch Sent: Tuesday, July 07, 2009 6:09 PM To: davinci-linux-open-source Subject: RE: LSP 2.10 Previewer hung on preview task Thaks this could be a problem. I have changed - wait_for_completion_interruptible(&(device->wfc)); + wait_for_completion_interruptible_timeout(&(device->wfc), ); But with any success it hung somewhere else. However I will check the H3A Print /proc/interupts is impossible, because when it hungs, it hungs totaly. I have no way to do anything. Only to restart whole system. Ondrej Pindroch SoftHard Technology ltd. Tel: +421(2)65459327 Fax: +421(2)65459329 Mobile:+421(904)906011 -----Original Message----- From: "Jadav, Brijesh R" <[email protected]> To: Ondrej Pindroch <[email protected]>, davinci-linux-open-source <[email protected]> Date: Tue, 7 Jul 2009 12:22:44 +0530 Subject: RE: LSP 2.10 Previewer hung on preview task Hi, Can you check whether H3A is enabled in the Kernel and CCDC output for H3A is enabled? As far as I remember, there was some issue with the H3A and previewer. When H3A is enabled, previewer stops giving interrupts. Can you check whether previewer interrupts are coming properly? You can check it by printing /proc/interrupts file. There should an entry for the previewer in this file and it should be incrementing if interrupts are coming properly. If interrupt is not coming, previewer will wait for the interrupt and will not come out of it Thanks, Brijesh Jadav From:[email protected] [mailto:[email protected]] On Behalf OfOndrej Pindroch Sent: Monday, July 06, 2009 7:47 PM To: davinci-linux-open-source Subject: LSP 2.10 Previewer hung on preview task Hi Do someone have tested davinci_previewer from LSP 2.10 on DVEVM DM6446. I have made one test with one frame and all was ok. But when use previewer for stream from MT9P031 board. It hung on IOCTL - PREV_PREVIEW. I have put some printk() in driver. All is ok till: wait_for_completion_interruptible(&(device->wfc)); It hung. All other threads are runnig, but I am not able to end whole applicatio, because of this one thread. Please suggest what could be problem. Ondrej Pindroch SoftHard Technology ltd.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
