I have studied the v4l2 display driver,it supported V4L2_MEMORY_USERPTR mothod,it seemed can accept a buffer address but it must be mmaped to the display buffer first,So the captured buffer datas must translate to the mmaped buffer,so the result is equal to mmap display buffer directly.
V4L2_MEMORY_MMAP : v4l2 capture buffer->address1(mmaped) -> EDMA-> address2 (mmaped)<-v4l2 or fbdev buffer V4L2_MEMORY_USERPTR :v4l2 capture buffer->address1(mmaped) -> EDMA-> address2 (mmaped)->v4l2 or fbdev buffer 2009-07-09 zuowenping 发件人： zuowenping 发送时间： 2009-07-09 19:35:44 收件人： davinci-linux-open-source 抄送： 主题： Can i give the capture buffer address to fbdev or v4l2 for displaydirectly? dear all: I am now using dm355 for capturing 640x480(30 frame / second) picture and displayed in svga mode 800x600(60 frame / second) by ths8200.if i used edma to translated data from v4l2 caputured buffer to frame buffer, It will emerge noised pictures,i have set PBBPR register with value 30 .but if i change to displayed in vga mode 640x480(60 f/s),it seem ok!it seemed the ddr speed(171M) is not enough! but My project GUI(osd) must be set as 800x600,So i have to change displaying to svga.I don't want to used edma, then can i give the displayer driver(fbdev or v4l2) my caputre buffer address directly? 2009-07-09 zuowenping
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
