Sudhakar Rajashekhara <[email protected]> writes:
> There are two instances of MMC/SD on da850/omap-l138.
> Connector for the first instance is available on the
> EVM. This patch adds support for this instance.
>
> This patch also adds support for card detect and write
> protect switches on da850/omap-l138 EVM.
>
> Signed-off-by: Sudhakar Rajashekhara <[email protected]>
Thanks, pushing today.
Kevin
> ---
> Since the previous version:
> 1. Used GPIO_TO_PIN macro to get the GPIO pin numbers.
> 2. Simplified get_ro and get_cd functions.
> 3. Removed the #ifdef macro guards both in board-da850-evm.c
> and da850.c files.
>
> This patch is dependent on the following patches which
> I have submitted earlier:
> [PATCH] davinci: Macro to convert GPIO signal to GPIO pin number
> [PATCH v3] davinci: Add platform support for da850/omap-l138 GLCD
>
> arch/arm/mach-davinci/board-da850-evm.c | 42
> ++++++++++++++++++++++++++++
> arch/arm/mach-davinci/da850.c | 23 +++++++++++++++
> arch/arm/mach-davinci/devices-da8xx.c | 36 ++++++++++++++++++++++++
> arch/arm/mach-davinci/include/mach/da8xx.h | 4 ++
> arch/arm/mach-davinci/include/mach/mux.h | 10 ++++++
> 5 files changed, 115 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c
> b/arch/arm/mach-davinci/board-da850-evm.c
> index b1df784..eb998ce 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -33,6 +33,9 @@
> #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
> #define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10)
>
> +#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
> +#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
> +
> static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
> .bus_freq = 100, /* kHz */
> .bus_delay = 0, /* usec */
> @@ -63,6 +66,23 @@ static struct snd_platform_data da850_evm_snd_data = {
> .rxnumevt = 1,
> };
>
> +static int da850_evm_mmc_get_ro(int index)
> +{
> + return gpio_get_value(DA850_MMCSD_WP_PIN);
> +}
> +
> +static int da850_evm_mmc_get_cd(int index)
> +{
> + return !gpio_get_value(DA850_MMCSD_CD_PIN);
> +}
> +
> +static struct davinci_mmc_config da850_mmc_config = {
> + .get_ro = da850_evm_mmc_get_ro,
> + .get_cd = da850_evm_mmc_get_cd,
> + .wires = 4,
> + .version = MMC_CTLR_VERSION_2,
> +};
> +
> static int da850_lcd_hw_init(void)
> {
> int status;
> @@ -134,6 +154,28 @@ static __init void da850_evm_init(void)
> pr_warning("da830_evm_init: watchdog registration failed: %d\n",
> ret);
>
> + ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
> + if (ret)
> + pr_warning("da850_evm_init: mmcsd0 mux setup failed: %d\n",
> + ret);
> +
> + ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
> + if (ret)
> + pr_warning("da850_evm_init: can not open GPIO %d\n",
> + DA850_MMCSD_CD_PIN);
> + gpio_direction_input(DA850_MMCSD_CD_PIN);
> +
> + ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
> + if (ret)
> + pr_warning("da850_evm_init: can not open GPIO %d\n",
> + DA850_MMCSD_WP_PIN);
> + gpio_direction_input(DA850_MMCSD_WP_PIN);
> +
> + ret = da8xx_register_mmcsd0(&da850_mmc_config);
> + if (ret)
> + pr_warning("da850_evm_init: mmcsd0 registration failed: %d\n",
> + ret);
> +
> davinci_serial_init(&da850_evm_uart_config);
>
> /*
> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index e6e605b..9debd57 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -304,6 +304,12 @@ static struct clk lcdc_clk = {
> .psc_ctlr = 1,
> };
>
> +static struct clk mmcsd_clk = {
> + .name = "mmcsd",
> + .parent = &pll0_sysclk2,
> + .lpsc = DA8XX_LPSC0_MMC_SD,
> +};
> +
> static struct davinci_clk da850_clks[] = {
> CLK(NULL, "ref", &ref_clk),
> CLK(NULL, "pll0", &pll0_clk),
> @@ -343,6 +349,7 @@ static struct davinci_clk da850_clks[] = {
> CLK("davinci_emac.1", NULL, &emac_clk),
> CLK("davinci-mcasp.0", NULL, &mcasp_clk),
> CLK("da8xx_lcdc.0", NULL, &lcdc_clk),
> + CLK("davinci_mmc.0", NULL, &mmcsd_clk),
> CLK(NULL, NULL, NULL),
> };
>
> @@ -434,9 +441,18 @@ static const struct mux_config da850_pins[] = {
> MUX_CFG(DA850, LCD_HSYNC, 19, 0, 15, 2, false)
> MUX_CFG(DA850, LCD_VSYNC, 19, 4, 15, 2, false)
> MUX_CFG(DA850, NLCD_AC_ENB_CS, 19, 24, 15, 2, false)
> + /* MMC/SD0 function */
> + MUX_CFG(DA850, MMCSD0_DAT_0, 10, 8, 15, 2, false)
> + MUX_CFG(DA850, MMCSD0_DAT_1, 10, 12, 15, 2, false)
> + MUX_CFG(DA850, MMCSD0_DAT_2, 10, 16, 15, 2, false)
> + MUX_CFG(DA850, MMCSD0_DAT_3, 10, 20, 15, 2, false)
> + MUX_CFG(DA850, MMCSD0_CLK, 10, 0, 15, 2, false)
> + MUX_CFG(DA850, MMCSD0_CMD, 10, 4, 15, 2, false)
> /* GPIO function */
> MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false)
> MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false)
> + MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
> + MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
> #endif
> };
>
> @@ -491,6 +507,13 @@ const short da850_lcdcntl_pins[] __initdata = {
> -1
> };
>
> +const short da850_mmcsd0_pins[] __initdata = {
> + DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
> + DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
> + DA850_GPIO4_0, DA850_GPIO4_1,
> + -1
> +};
> +
> /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
> static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
> [IRQ_DA8XX_COMMTX] = 7,
> diff --git a/arch/arm/mach-davinci/devices-da8xx.c
> b/arch/arm/mach-davinci/devices-da8xx.c
> index 094eb8e..58ad5b6 100644
> --- a/arch/arm/mach-davinci/devices-da8xx.c
> +++ b/arch/arm/mach-davinci/devices-da8xx.c
> @@ -412,3 +412,39 @@ int __init da8xx_register_lcdc(void)
> {
> return platform_device_register(&da850_lcdc_device);
> }
> +
> +static struct resource da8xx_mmcsd0_resources[] = {
> + { /* registers */
> + .start = DA8XX_MMCSD0_BASE,
> + .end = DA8XX_MMCSD0_BASE + SZ_4K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + { /* interrupt */
> + .start = IRQ_DA8XX_MMCSDINT0,
> + .end = IRQ_DA8XX_MMCSDINT0,
> + .flags = IORESOURCE_IRQ,
> + },
> + { /* DMA RX */
> + .start = EDMA_CTLR_CHAN(0, 16),
> + .end = EDMA_CTLR_CHAN(0, 16),
> + .flags = IORESOURCE_DMA,
> + },
> + { /* DMA TX */
> + .start = EDMA_CTLR_CHAN(0, 17),
> + .end = EDMA_CTLR_CHAN(0, 17),
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +static struct platform_device da8xx_mmcsd0_device = {
> + .name = "davinci_mmc",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(da8xx_mmcsd0_resources),
> + .resource = da8xx_mmcsd0_resources,
> +};
> +
> +int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
> +{
> + da8xx_mmcsd0_device.dev.platform_data = config;
> + return platform_device_register(&da8xx_mmcsd0_device);
> +}
> diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h
> b/arch/arm/mach-davinci/include/mach/da8xx.h
> index 0af3fb6..0af141f 100644
> --- a/arch/arm/mach-davinci/include/mach/da8xx.h
> +++ b/arch/arm/mach-davinci/include/mach/da8xx.h
> @@ -16,6 +16,7 @@
> #include <mach/i2c.h>
> #include <mach/emac.h>
> #include <mach/asp.h>
> +#include <mach/mmc.h>
>
> /*
> * The cp_intc interrupt controller for the da8xx isn't in the same
> @@ -38,6 +39,7 @@
> #define DA8XX_GPIO_BASE 0x01e26000
> #define DA8XX_PSC1_BASE 0x01e27000
> #define DA8XX_LCD_CNTRL_BASE 0x01e13000
> +#define DA8XX_MMCSD0_BASE 0x01c40000
>
> #define PINMUX0 0x00
> #define PINMUX1 0x04
> @@ -68,6 +70,7 @@ int da8xx_register_i2c(int instance, struct
> davinci_i2c_platform_data *pdata);
> int da8xx_register_watchdog(void);
> int da8xx_register_emac(void);
> int da8xx_register_lcdc(void);
> +int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
> void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
>
> extern struct platform_device da8xx_serial_device;
> @@ -106,6 +109,7 @@ extern const short da850_i2c1_pins[];
> extern const short da850_cpgmac_pins[];
> extern const short da850_mcasp_pins[];
> extern const short da850_lcdcntl_pins[];
> +extern const short da850_mmcsd0_pins[];
>
> int da8xx_pinmux_setup(const short pins[]);
>
> diff --git a/arch/arm/mach-davinci/include/mach/mux.h
> b/arch/arm/mach-davinci/include/mach/mux.h
> index 30bf329..b233564 100644
> --- a/arch/arm/mach-davinci/include/mach/mux.h
> +++ b/arch/arm/mach-davinci/include/mach/mux.h
> @@ -798,9 +798,19 @@ enum davinci_da850_index {
> DA850_LCD_VSYNC,
> DA850_NLCD_AC_ENB_CS,
>
> + /* MMC/SD0 function */
> + DA850_MMCSD0_DAT_0,
> + DA850_MMCSD0_DAT_1,
> + DA850_MMCSD0_DAT_2,
> + DA850_MMCSD0_DAT_3,
> + DA850_MMCSD0_CLK,
> + DA850_MMCSD0_CMD,
> +
> /* GPIO function */
> DA850_GPIO2_15,
> DA850_GPIO8_10,
> + DA850_GPIO4_0,
> + DA850_GPIO4_1,
> };
>
> #ifdef CONFIG_DAVINCI_MUX
> --
> 1.5.6
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source