Vaibhav,
I don't see any serious issues raised here. I can send another patch to fix
this if needed.
Regards,
Murali
>> +#include <linux/spinlock.h>
>> #include <linux/kernel.h>
>> +#include <linux/io.h>
>[Hiremath, Vaibhav] You may want to put one line gap here.
Ok. Just editorial.
>> +#include <mach/hardware.h>
>>
>> #include "vpif.h"
>>
>> @@ -31,6 +35,12 @@ MODULE_LICENSE("GPL");
>> #define VPIF_CH2_MAX_MODES (15)
>> #define VPIF_CH3_MAX_MODES (02)
>>
>> +static resource_size_t res_len;
>> +static struct resource *res;
>[Hiremath, Vaibhav] Do we really require this to be static variable?
>I think we can manage it to be local variable.
Yes. We could. Probably change it with a new patch. Don't want to hold up merge
because of this.
>
>> +spinlock_t vpif_lock;
>> +
>> +void __iomem *vpif_base;
>> +
>> static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
>> {
>> if (val)
>> @@ -151,17 +161,17 @@ static void config_vpif_params(struct
>> vpif_params *vpifparams,
>> else if (config->capture_format) {
>> /* Set the polarity of various pins */
>> vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
>> - vpifparams-
>> >params.raw_params.fid_pol);
>> + vpifparams->iface.fid_pol);
>> vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
>> - vpifparams->params.raw_params.vd_pol);
>> + vpifparams->iface.vd_pol);
>> vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
>> - vpifparams->params.raw_params.hd_pol);
>> + vpifparams->iface.hd_pol);
>>
>> value = regr(reg);
>> /* Set data width */
>> value &= ((~(unsigned int)(0x3)) <<
>> VPIF_CH_DATA_WIDTH_BIT);
>> - value |= ((vpifparams->params.raw_params.data_sz)
>> <<
>> + value |= ((vpifparams->params.data_sz) <<
>> VPIF_CH_DATA_WIDTH_BIT);
>> regw(value, reg);
>> }
>> @@ -227,8 +237,60 @@ int vpif_channel_getfid(u8 channel_id)
>> }
>> EXPORT_SYMBOL(vpif_channel_getfid);
>>
>> -void vpif_base_addr_init(void __iomem *base)
>> +static int __init vpif_probe(struct platform_device *pdev)
>> +{
>> + int status = 0;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res)
>> + return -ENOENT;
>> +
>> + res_len = res->end - res->start + 1;
>> +
>> + res = request_mem_region(res->start, res_len, res->name);
>> + if (!res)
>> + return -EBUSY;
>> +
>> + vpif_base = ioremap(res->start, res_len);
>> + if (!vpif_base) {
>> + status = -EBUSY;
>> + goto fail;
>> + }
>> +
>> + spin_lock_init(&vpif_lock);
>> + dev_info(&pdev->dev, "vpif probe success\n");
>> + return 0;
>> +
>> +fail:
>> + release_mem_region(res->start, res_len);
>> + return status;
>> +}
>> +
>> +static int vpif_remove(struct platform_device *pdev)
>> {
>> - vpif_base = base;
>> + iounmap(vpif_base);
>> + release_mem_region(res->start, res_len);
>> + return 0;
>> }
>> -EXPORT_SYMBOL(vpif_base_addr_init);
>> +
>> +static struct platform_driver vpif_driver = {
>> + .driver = {
>> + .name = "vpif",
>> + .owner = THIS_MODULE,
>> + },
>> + .remove = __devexit_p(vpif_remove),
>> + .probe = vpif_probe,
>> +};
>> +
>> +static void vpif_exit(void)
>> +{
>> + platform_driver_unregister(&vpif_driver);
>> +}
>> +
>> +static int __init vpif_init(void)
>> +{
>> + return platform_driver_register(&vpif_driver);
>> +}
>> +subsys_initcall(vpif_init);
>> +module_exit(vpif_exit);
>> +
>> diff --git a/drivers/media/video/davinci/vpif.h
>> b/drivers/media/video/davinci/vpif.h
>> index fca26dc..188841b 100644
>> --- a/drivers/media/video/davinci/vpif.h
>> +++ b/drivers/media/video/davinci/vpif.h
>> @@ -19,6 +19,7 @@
>> #include <linux/io.h>
>> #include <linux/videodev2.h>
>[Hiremath, Vaibhav] one line gap here.
Again editorial.
>> #include <mach/hardware.h>
>> +#include <mach/dm646x.h>
>>
>> /* Maximum channel allowed */
>> #define VPIF_NUM_CHANNELS (4)
>> @@ -26,7 +27,9 @@
>> #define VPIF_DISPLAY_NUM_CHANNELS (2)
>>
>> /* Macros to read/write registers */
>> -static void __iomem *vpif_base;
>> +extern void __iomem *vpif_base;
>> +extern spinlock_t vpif_lock;
>[Hiremath, Vaibhav] I think I would want to check compete driver. How these
>extern variables have been used.
>
Let me know if you find some thing wrong in the driver. At this time, I just
don't see any issues with this.
>> +
>> #define regr(reg) readl((reg) + vpif_base)
>> #define regw(value, reg) writel(value, (reg + vpif_base))
>>
>> @@ -280,6 +283,10 @@ static inline void enable_channel1(int enable)
>> /* inline function to enable interrupt for channel0 */
>> static inline void channel0_intr_enable(int enable)
>> {
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vpif_lock, flags);
>> +
>> if (enable) {
>> regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
>> regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
>> @@ -292,11 +299,16 @@ static inline void channel0_intr_enable(int
>> enable)
>> regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
>> VPIF_INTEN_SET);
>> }
>> + spin_unlock_irqrestore(&vpif_lock, flags);
>> }
>>
>> /* inline function to enable interrupt for channel1 */
>> static inline void channel1_intr_enable(int enable)
>> {
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vpif_lock, flags);
>> +
>> if (enable) {
>> regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
>> regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
>> @@ -309,6 +321,7 @@ static inline void channel1_intr_enable(int
>> enable)
>> regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
>> VPIF_INTEN_SET);
>> }
>> + spin_unlock_irqrestore(&vpif_lock, flags);
>> }
>>
>> /* inline function to set buffer addresses in case of Y/C non mux
>> mode */
>> @@ -431,6 +444,10 @@ static inline void enable_channel3(int enable)
>> /* inline function to enable interrupt for channel2 */
>> static inline void channel2_intr_enable(int enable)
>> {
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vpif_lock, flags);
>> +
>> if (enable) {
>> regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
>> regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
>> @@ -442,11 +459,16 @@ static inline void channel2_intr_enable(int
>> enable)
>> regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
>> VPIF_INTEN_SET);
>> }
>> + spin_unlock_irqrestore(&vpif_lock, flags);
>> }
>>
>> /* inline function to enable interrupt for channel3 */
>> static inline void channel3_intr_enable(int enable)
>> {
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&vpif_lock, flags);
>> +
>> if (enable) {
>> regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
>> regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
>> @@ -459,6 +481,7 @@ static inline void channel3_intr_enable(int
>> enable)
>> regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
>> VPIF_INTEN_SET);
>> }
>> + spin_unlock_irqrestore(&vpif_lock, flags);
>> }
>>
>> /* inline function to enable raw vbi data for channel2 */
>> @@ -571,7 +594,7 @@ struct vpif_channel_config_params {
>> v4l2_std_id stdid;
>> };
>>
>> -struct vpif_interface;
>> +struct vpif_video_params;
>> struct vpif_params;
>> struct vpif_vbi_params;
>>
>> @@ -579,13 +602,6 @@ int vpif_set_video_params(struct vpif_params
>> *vpifparams, u8 channel_id);
>> void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
>> u8 channel_id);
>> int vpif_channel_getfid(u8 channel_id);
>> -void vpif_base_addr_init(void __iomem *base);
>> -
>> -/* Enumerated data types */
>> -enum vpif_capture_pinpol {
>> - VPIF_CAPTURE_PINPOL_SAME = 0,
>> - VPIF_CAPTURE_PINPOL_INVERT = 1
>> -};
>>
>> enum data_size {
>> _8BITS = 0,
>> @@ -593,13 +609,6 @@ enum data_size {
>> _12BITS,
>> };
>>
>> -struct vpif_capture_params_raw {
>> - enum data_size data_sz;
>> - enum vpif_capture_pinpol fid_pol;
>> - enum vpif_capture_pinpol vd_pol;
>> - enum vpif_capture_pinpol hd_pol;
>> -};
>> -
>> /* Structure for vpif parameters for raw vbi data */
>> struct vpif_vbi_params {
>> __u32 hstart0; /* Horizontal start of raw vbi data for first
>> field */
>> @@ -613,18 +622,19 @@ struct vpif_vbi_params {
>> };
>>
>> /* structure for vpif parameters */
>> -struct vpif_interface {
>> +struct vpif_video_params {
>> __u8 storage_mode; /* Indicates field or frame mode */
>> unsigned long hpitch;
>> v4l2_std_id stdid;
>> };
>>
>> struct vpif_params {
>> - struct vpif_interface video_params;
>> + struct vpif_interface iface;
>> + struct vpif_video_params video_params;
>> struct vpif_channel_config_params std_info;
>> union param {
>> struct vpif_vbi_params vbi_params;
>> - struct vpif_capture_params_raw raw_params;
>> + enum data_size data_sz;
>> } params;
>> };
>>
>> --
>> 1.6.0.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-
>> media" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
