My mistake that I did not read through his comments at the end of his response. Thanks for pointing it out.
-----Original Message----- From: Sergei Shtylyov [mailto:[email protected]] Sent: Wednesday, August 26, 2009 3:26 PM To: Subbrathnam, Swaminathan Cc: [email protected]; [email protected] Subject: Re: [PATCH] MUSB: Add support for DM646x USB. Hello. Swaminathan S wrote: > DM646x USB controller is based on Mentor USB Controller (MUSB). This patch > adds support for DM646x USB controller to the MUSB driver. DM646x USB > controller > doest not support OTG and hence the roles(Host/Device) need to be specified > as part of Kernel compile and the same needs to be set up when DM646x boots > up. > The VBUS is controlled through a CPLD on the DM646x EVM. This patch > implements > the VBUS control accordingly. > > Signed-off-by: Swaminathan S <[email protected]> Again, Kevin has already told you to rework the way VBUS is handled to avoid using machine_is_*()... WBR, Sergei _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
