On Fri, 2009-09-11 at 15:47 +0800, zuowenping wrote: > > dear all: > > I am developing in dm355 platform now,I often burn ubl and uboot > by ccs3.3 and emluator xds560(I using nand_programmer.out ), then i > will download kernel(uImage) by tftp and burn it to nand flash,so i > can boot linux by nfs mode, and i can use the yaffs2 filesystem to > burn myself rootfs(inclued my programer) to nandflash! > > The course is complicated! so if i have to make a lot > products,The worker cann't use the linux envirment,so how can i make a > quick simple method to burn the ubl,uboot,kernel params,kernel,rootfs > to the nand flash? >
A company I used to work for pre-program the FLASH before mounting them on the board. The pre-program was done with a flash/eeprom programmer. I recall that it took some effort to locate the right device that can burn multiple flash at the same time. Regards, Steve _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
