Try adding a rootdelay=1 option to your kernel command line, where 1 is the number of seconds to wait before mounting the root filesystem.
Mike. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andrea Gasparini Sent: 11 September 2009 15:42 To: [email protected] Subject: davinci git and RootFs on SD card. Hi, I finally tried the mighty davinci git kernel. ;) I'm able to make it start on EVM and on my board, that's ok. unfortunately, I'm having some trouble in taking the rootfs from the SD card. I found that with "ip=dhcp" in the cmdline, it handles correctly the mmc slot and recognizes the card inserted into it... (well, actually he hangs on starting cron service, but that's another tale!) ;) I see something like that: ... mmc1: new high speed SD card at address b368 mmcblk0: mmc1:b368 USD 1.85 GiB mmcblk0: p1 ... Instead, without "ip=dhcp", or with "ip=none", it doesn't sees any mmc card at all: .... Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. VFS: Cannot open root device "mmcblk0p1" or unknown-block(2,0) ... ( can't stand why he search for a root-nfs too... ) I'm attaching both the boot log, on a DM355EVM board. Any ideas? Thanks, bye! -- Andrea Gasparini ---- ImaVis S.r.l. ---- web: www.imavis.com
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
