Hi all; I am trying to reduce our startup time for our DM355 custom board. Currently it works fine, we just need it to be faster. I wanted to try an uncompressed kernel,. Built it but when downloaded into flash, u-boot won;t load it and complains:
U-Boot 1.2.0 (Feb 2 2008 - 23:52:10) DRAM: 128 MB NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V 8-bit) Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V 8-bit) Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 2048 MiB In: serial Out: serial Err: serial ARM Clock :- 216MHz DDR Clock :- 171MHz Hit any key to stop autoboot: 3 Loading from NAND 1GiB 3,3V 8-bit, offset 0x400000 ** Bad Magic Number 0xe321f0d3 ** ## Booting image at 80700000 ... Bad Magic Number DM355 EVM # Any ideas why this might be so? -- --Adrian Edmonds _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
