Hello,
I am getting following error when trying to set DMA transfer mode as UDMA2 on
latest DaVinci (DM6467) git kernel using hdparm (9.27 or older):
# ./hdparm -d1 -Xudma2 /dev/hda
/dev/hda:hda: UDMA/66 mode selected
setting using_dma to 1 (on)
hda: UDMA/66 mode selected
setting xfermode to 66 (UltraDMA mode2)
HDIO_DRIVE_CMD(setxfermode) failed: Invalid argument
using_dma = 1 (on)
It seems DMA mode setting other than the default mode returns this error. That
is, if I use "-Xudma4" in above command it returns success as UDMA4 is the
default mode on DM6467.
I made following change which allows hdparm to set any supported DMA mode. Can
anyone confirm if this is a hdparm compatibility (incorrect use of ioctl?) or
the patch below indeed fixes the issue?
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index d3440b5..6e7ae2b 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -162,7 +162,7 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long
arg)
if (tf->command == ATA_CMD_SET_FEATURES &&
tf->feature == SETFEATURES_XFER &&
tf->nsect >= XFER_SW_DMA_0) {
- xfer_rate = ide_find_dma_mode(drive, XFER_UDMA_6);
+ xfer_rate = ide_find_dma_mode(drive, tf->nsect);
if (xfer_rate != tf->nsect) {
err = -EINVAL;
goto abort;
Thanks.
-
Hemant
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
