Host map configuration instructs the interrupt controller to route interrupt channels to FIQ or IRQ lines. Currently, DA8xx family of devices leave these registers at their reset-default values.
TNETV107X however does not have sane reset defaults, and therefore this architecture needs to reconfigure the host-map such that channels 0 and 1 go to FIQ, and the remaining channels raise IRQs. This patch adds an optional host map argument to cp_intc_init() for this. Signed-off-by: Cyril Chemparathy <[email protected]> --- arch/arm/mach-davinci/board-da830-evm.c | 2 +- arch/arm/mach-davinci/board-da850-evm.c | 2 +- arch/arm/mach-davinci/cp_intc.c | 6 +++++- arch/arm/mach-davinci/include/mach/cp_intc.h | 2 +- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index ea293b8..db5ac0f 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -569,7 +569,7 @@ static __init void da830_evm_irq_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ, - soc_info->intc_irq_prios); + soc_info->intc_irq_prios, NULL); } static void __init da830_evm_map_io(void) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 411284d..ef691ae 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -741,7 +741,7 @@ static __init void da850_evm_irq_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ, - soc_info->intc_irq_prios); + soc_info->intc_irq_prios, NULL); } static void __init da850_evm_map_io(void) diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index 37311d1..2a8d26e 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -101,7 +101,7 @@ static struct irq_chip cp_intc_irq_chip = { }; void __init cp_intc_init(void __iomem *base, unsigned short num_irq, - u8 *irq_prio) + u8 *irq_prio, u32 *host_map) { unsigned num_reg = BITS_TO_LONGS(num_irq); int i; @@ -157,6 +157,10 @@ void __init cp_intc_init(void __iomem *base, unsigned short num_irq, cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); } + if (host_map) + for (i = 0; host_map[i] != -1; i++) + cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); + /* Set up genirq dispatching for cp_intc */ for (i = 0; i < num_irq; i++) { set_irq_chip(i, &cp_intc_irq_chip); diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index c4d27ee..121b114 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -52,6 +52,6 @@ #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) void __init cp_intc_init(void __iomem *base, unsigned short num_irq, - u8 *irq_prio); + u8 *irq_prio, u32 *host_map); #endif /* __ASM_HARDWARE_CP_INTC_H */ -- 1.6.3.3 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
