Hi,everyone!
I'm testing dm365dvr
Now I am faced with a very strange problem.
I can correctly boot my dm365dvr with using NFS filesystem,
But,It is puzzling that an error message will apper on the console after
restoring the DVR NAND flash filesystem using NFS and booting DVR using
filesystem present in NAND.
It's worth noting that the filesystem in NAND is the same as NFS filesystem,
below is the error message:
*******************************************
Configured eth0 as 192.168.1.200 ...
Error, /sbin/dhcpcd-bin: not running
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFBRDADDR: No such device
*******************************************
boot DM365DVR still using filesystem in NAND flash regardless of the error
report,
messages like below would be seen:
there is not eth0,
*******************************************
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
*******************************************
so,I do not understand.please help me!
--
Best Wishes！
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
