Hi, I am working on a custom board which has TI Davinci DM6467 Processor running Linux 2.6.10 as the host processor to which we have a USB2640 hub controller connected on the USB bus. This hub controller has a built in SD card controller. So basically this hub supports two USB devices and one SD card. The problem I am facing right now is that if the SD card is connected during kernel boot up, the SD card gets detected and also enumerated. After this I am able to mount the SD card. But in case I plug in the SD card after kernel boot up, the SD card does not get detected when I insert it. The USB devices like USB pen drive or mouse connected to the USB ports are detected when they are hot plugged.
So how do I enable hot plugging for the SD card? Basically how do I enumerate the SD card once the kernel is up and the SD card is hot plugged? Thanks, bkrpri ________________________________ http://www.mindtree.com/email/disclaimer.html
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
